BOTH LIGHTING Smart DJ S6 User Manual page 7

Wireless Link Function
Setting Master Light
Select your master light.
Press the Menu button » choose Set» press Enter button » choose DMX channel, you can choose
6CH or 10CH. Please ensure that all the slave light channels are set to the same DMX channel as
the master light.
Press Menu button twice to return to the main menu.
Selecting Master Light Mode
You can choose from three modes: Shows, Sound, and Color. See unit functions section for mode
setting options.
Slave Light Settings
Turn on each slave light and set the DMX channel by following the instructions in step 2 of the
Setting Master Light section.
In main menu select DMX512 » press the Enter button » use the Up/Down buttons to set the light to
A001. Do this for each individual light All slave lights must be set to A001.
Once you've completed the procedures described above, the master lights wireless DMX signal
LED indicator should be red while the slave lights LED indicators should be green.
Noted: Make sure all the lights in the same wireless frequency.
The wireless Dmx signal has 7colors (red, green, yellow,blue,pink,cyan,white), each color means
one wireless group.
You can set and change the wireless Dmx group channel in the wireless Dmx signal button.