Advertisement
Model:
ADP10-OUT
Adapter
Extension Wire
Contents includes: Power adapter, 5-foot power cord and a 10-foot extension wire.
Outdoor Approved Adapter
Installation and Operating Instructions
Description: This is an outdoor approved adapter suited for wet, damp dry locations.
It plugs into 120VAC outlet and converts it to 6-volts DC to operate Firegear Outdoor
electronic systems.
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS
DO NOT ATTEMPT TO INSTALL OR OPERATE THIS PRODUCT
INSTALLATION PRECAUTION:
All
fire pits requires a minimum 18-square inches (per side) of cross ventilation.
Failure to provide proper ventilation can void the warranty.
Firegear Outdoors ADP10-OUT Adapter
REV. A
PN#90118
Advertisement
Table of Contents
Related Manuals for Firegear ADP10-OUT
Summary of Contents for Firegear ADP10-OUT
- Page 1 Installation and Operating Instructions Description: This is an outdoor approved adapter suited for wet, damp dry locations. It plugs into 120VAC outlet and converts it to 6-volts DC to operate Firegear Outdoor electronic systems. IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS...
- Page 2 (800) 966-8126 Firegear Outdoors 14520 Delta Lane, Suite 105 Huntington Beach, CA 92647 Web Site: www.firegearoutdoors.com Manual changes often occur, ensure to check the Firegear Outdoor website for any recent updates and warranty information. Firegear Outdoors ADP10-OUT Adapters REV. A...
Need help?
Do you have a question about the ADP10-OUT and is the answer not in the manual?
Questions and answers