ABNORMAL CONDITION
When the washer is abnormal, the washer stops as the every actions turns off, beep tone sounds
ON-0.1 second and OFF-0.1 second for 6 seconds and number window LED display abnormal
code and blink on and off. The washer judges the following six conditions as abnormal condition.
1) Abnormal condition of water supply
In supplying with water, the water level does not reach 1 level within 10 minutes or does not
reach your chosen water level within 20 minutes from the water level of 1 level.
The number window LED display abnormal code:
same time and the electric buzzer sounds to indicate a problem.
2) Abnormal condition of drain
In draining, the water level does not go down below the reset level of the water level sensor
within 8 minutes.
The number window LED display abnormal code:
same time and the electric buzzer sounds to indicate a problem.
3) Abnormal condition of spin-dry
•The tub switch works 3 times continuously during the program of rinse-spin or works 1 time
in the single program of spin-dry.
The number window LED display abnormal code:
same time and the electric buzzer sounds to indicate a problem.
• The washer lid is opened.
The number window LED display abnormal code:
same time and the electric buzzer sounds to indicate a problem.
4) Abnormal condition of wash.
The number window LED display abnormal code:
same time and the electric buzzer sounds to indicate a problem.
5) Abnormal condition of water level sensor.
The water level sensor malfunctions.
The number window LED display abnormal code:
same time and the electric buzzer sounds to indicate a problem.
6) Abnormal condition of load sensor.
The number window LED display abnormal code:
same time and the electric buzzer sounds to indicate a problem.
CIRCUIT DIAGRAM
and begin blinking on and off at the
and begin blinking on and off at the
and begin blinking on and off at the
and begin blinking on and off at the
and begin blinking on and off at the
and begin blinking on and off at the
and begin blinking on and off at the
2
XQB100-Y1066S