Page 2
• Assure your headset is properly connected to your radio • Assure your Battery is properly charged and has enough battery power left to cover your next session Feel free to ask the Riedel-team if you need any support or short training.
Page 3
• Assure your key-panel has all destinations you need to talk/listen to • Assure no necessary source/destination are muted • Assure your volume is set ‘fit for purpose’ (test) Feel free to ask the Riedel-team if you need any support or short training.
Page 4
• Assure your headset is properly connected (radio/intercom) • Assure your volume is set ‘fit for purpose’ (test) • Assure your microphone is close to your mouth (test) Feel free to ask the Riedel-team if you need any support or short training.
Page 5
RADIO (ONLY) - HEADSET Push to Talk (PTT) Button Loudspeaker Microphone with windsock Microphone is close, pointing to the mouth...
Page 6
RADIO & INTERCOM HEADSET Microphone with windsock Microphone is close, pointing to the mouth Loudspeaker with active noise cancelling Turn on process: • Connect headset with radio(s) Turn on radio microphone side first then others if available • • Check beep tones (two times three tones in a row) on headset speakers for full headset battery capacity •...
Page 7
• Turn on radio microphone side first then others if available • Check beep tones (two times three tones in a row) on headset speakers for full headset battery capacity • Connect with intercom Feel free to ask the Riedel-team if you need any support or short training.
Page 8
CHARGER Slots LED lights LED lights • blinking red = connection issue, battery issue • blinking green = 80% • static green = 100% • static red = charging...
Need help?
Do you have a question about the MTP850 S and is the answer not in the manual?
Questions and answers