1. Manuals
  2. Brands
  3. Award Manuals
  4. Computer Hardware
  5. ECX810
  6. User manual

Award ECX810 User Manual

Intel ep80579 ecx embedded board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ECX810
Intel
EP80579
®
ECX Embedded Board
USER'S MANUAL
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECX810 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Award ECX810

Summary of Contents for Award ECX810

  • Page 1 ECX810 Intel EP80579 ® ECX Embedded Board USER’S MANUAL Version 1.0...
  • Page 2 Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Intel EP80579 Integrated Processor are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation.

  • Page 3: Table Of Contents

    Table of Contents Introduction ............1 Product Description............. 1 Checklist................2 ECX810 Specifications ............3 Board Dimensions ............... 4 Installations ............5 Installing the Memory ............6 Setting the Jumpers ............. 7 Connectors on ECX810............. 10 BIOS Setup ............21 Drivers Installation ........41 Appendix ............43...
  • Page 4 This page is intentionally left blank. ECX810 User’s Manual...

  • Page 5: Introduction

    IICH has standard IA I/O peripheral capabilities. The ECX810’s EP80579 IA-32 core is a derivative of the Intel® Pentium® M processor. This low power IA-32 core is based on 90-nm process technology featuring 256-Kbyte L2 cache and 400/533 MHz quad-pumped internal front-side bus (FSB).

  • Page 6: Checklist

    INTRODUCTION Checklist Your ECX810 package should include the items listed below. • The ECX810 ECX embedded board • This User’s Manual • 1 CD containing chipset drivers and flash memory utility ECX810 User’s Manual...

  • Page 7: Ecx810 Specifications

    Intel EP80579 System on a Chip (SoC) Integrated Intel® Architecture (IA) processor and chipset (MCH/ICH) technology 1088-Ball FCBGA package BIOS Award BIOS, support ACPI Function Memory DDR2 400/533/667/800 SO-DIMM x1 (w/o ECC function), Max. 2GB, (600Mhz CPU at DDR2 667MHz only ) VGA & LVDS Panel XGI /Z11 2D Accelerator 1600 x 1200 PCI-E X 1 bus;...

  • Page 8: Board Dimensions

    INTRODUCTION Board Dimensions Below are dimensions of the board (top and bottom view.) ECX810 User’s Manual...

  • Page 9: Installations

    INTRODUCTION Installations This section provides information on how to use the jumpers and connectors on the ECX810 in order to set up a workable system. The topics covered are: Installing the Memory ................6 Setting the Jumpers................7 Connectors on ECX810............... 10...

  • Page 10: Installing The Memory

    INTRODUCTION Installing the Memory The ECX810 supports one DDR2 SO-DIMM memory socket for a maximum total memory of 2GB, DDR2 400/533/667/800 (w/o ECC function). Note: A 600MHz onboard processor will support DDR2 400/533/ 667MHz while 1200MHz & 1066MHz processors will support DDR2 400/533/667/800 MHz.

  • Page 11: Setting The Jumpers

    INTRODUCTION Setting the Jumpers Jumpers are used on ECX810 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ECX810 and their respective functions.
  • Page 12 Jumper Locations on ECX810 AT/ATX Power Selection CANBus Termination Setting (Reserved) Clear CMOS Setting Jumper Locations on ECX810..........Page JP2: AT(Emulation) /ATX Power Selection........9 JP4: Clear CMOS Setting ............... 9 JP5, JP6: CAN Bus Termination Setting (Reserved)...... 9 ECX810 User’s Manual...
  • Page 13 Note: AT (Emulation) does not require pressing the power button to turn on the system; plugging the AC power will turn on the system. JP4: Clear CMOS Setting Setting Normal Clear CMOS JP5, JP6: CAN Bus Termination Setting (Reserved) JP5, JP6 Setting Terminate Bus No Terminate Bus ECX810 User’s Manual...

  • Page 14: Connectors On Ecx810

    INTRODUCTION Connectors on ECX810 The connectors on ECX810 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on ECX810 and their respective functions. Connector Locations on ECX810 ............11 CN1: Serial ATA Connector..............

  • Page 15: Connector Locations On Ecx810

    INTRODUCTION Connector Locations on ECX810 ECX810 User’s Manual...

  • Page 16: Cn1: Serial Ata Connector

    Pin # Signal Name Not Used CN8: Compact Flash Connector (optional) CPUFAN1: System Fan Power Connector CPUFAN1 is a 3-pin header for system fans. The fan must be a 12V (500mA). Pin # Signal Name Ground +12V Rotation detection ECX810 User’s Manual...

  • Page 17: J1: Lan Led Pin Header

    P2_LED_TX P2_LINK100 P2V5_AUX GPIO GP24 +3.3V GPIO or Cut Pin HDD_LED J3: Power Supply Connector Use power cable (PW71) to connect to ATX Power Supply. Pin # Signal Name PS-ON Ground Ground +12V +3.3V Ground +3.3V 5VSB ECX810 User’s Manual...

  • Page 18: J4: So-Dimm Socket

    INTRODUCTION J4: SO-DIMM Socket The ECX810 supports one DDR2 SO-DIMM socket for a maximum memory of 2GB, DDR2 400/533/667/800 (w/o ECC function). Note: A 600MHz onboard processor will support DDR2 400/533/667MHz while 1200MHz & 1066MHz processors will support DDR2 400/533/667/800MHz.
  • Page 19 *Depends on JP1 setting (1-2 for 3.3V/default, 2-3 for 5V). Remarks: J2 supports TFT LCD panel model such as Hitachi TX18D11VM with 18 bit LVDS, resolution of 800x480 pixel JP1: LVDS VDD Select (5V / 3.3V) VDD Setting 3.3V ECX810 User’s Manual...

  • Page 20: J7: Ieee1588 Pin Header (Reserved)

    Backlight VRB N.C. Ground TX0- TX0+ Ground TX1- TX1+ Ground TX2- TX2+ Ground TXCLK- TXCLK+ Ground N.C. N.C. Ground N.C. N.C. Ground N.C. J7: IEEE1588 Pin Header (Reserved) Signal Name Signal Name TSTMDA TS_PPS ASMSIG AMMSIG RX_SNP TX_SNP ECX810 User’s Manual...

  • Page 21: J8: Gpio Pin Header (Reserved)

    Reset functions and can be connected to this J11 connector. J11 is connected to ID820 with the EXT109A (120mm) cable. Signal Name Signal Name F_OUT_R F_OUT_L L-IN-R L-IN-L PW_SW +3.3V RST_SW HDD_LED+ HDD_LED- Cut Pin Note:Audio Line_In connector for sound Recorder function only. ECX810 User’s Manual...

  • Page 22: J12: Vga Pin Header

    Connect the VGA8 CRT/VGA cable that comes with the board to J12. Signal Name Signal Name Green Blue DDCDA H_SYNC V_SYNC DDCCLK Cut Pin J13: CAN Bus Port1 Pin Header (Reserved) Signal Name Signal Name CAN0_L CAN0_H Cut Pin ECX810 User’s Manual...

  • Page 23: J14: Com2/3/4 Is A 30-Pin Header

    DSR2 SIN2 RTS2 CTS2 DTR2- DCD3 DSR3 SIN3 RTS3 SOUT3 CTS3 DTR3 RI3- DCD4 DSR4 SIN4 RTS4 SOUT4 CTS4 DTR4 Cut Pin J15: CAN Bus Port2 Pin Header (Reserved) Signal Name Signal Name CAN1_L CAN1_H Cut Pin ECX810 User’s Manual...

  • Page 24: J16: Lpc 80 Port Pin Header (Debug Use Only)

    INTRODUCTION J16: LPC 80 Port Pin Header (Debug Use Only) Signal Name Signal Name LAD0 PLTRST_N LAD1 CLK33 LAD2 +3.3V LAD3 L_FRAME_N Cut Pin ECX810 User’s Manual...

  • Page 25: Bios Setup

    BIOS SETUP BIOS Setup This chapter describes the different settings available in the Award BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction ................ 22 BIOS Setup................... 22 Standard CMOS Setup ..............24 Advanced BIOS Features .............
  • Page 26 The Award BIOS provides a Setup utility program for specifying the system configurations and settings. The BIOS ROM of the system stores the Setup utility. When you turn on the computer, the Award BIOS is immediately activated. Pressing the <Del> key immediately allows you to enter the Setup utility.
  • Page 27 Note: If the system cannot boot after making and saving system changes with Setup, the Award BIOS supports an override to the CMOS settings that resets your system to its default. Warning: It is strongly recommended that you avoid making any changes to the chipset defaults.
  • Page 28 The following describes each item of this menu. Date The date format is: Day : Sun to Sat Month : 1 to 12 Date : 1 to 31 Year : 1999 to 2099 ECX810 User’s Manual...
  • Page 29 Precomp : Write precompensation Landing Zone : Landing zone Sector : Number of sectors The Access Mode selections are as follows: (HD < 528MB) (HD > 528MB and supports Logical Block Addressing) Large (for MS-DOS only) Auto ECX810 User’s Manual...
  • Page 30 The system boot will not be halted for a disk error; it will stop for all other errors. All, But Disk/Key The system boot will not be halted for a key- board or disk error; it will stop for all others. ECX810 User’s Manual...
  • Page 31 (speed up memory access) or disable the cache function. Quick Power On Self Test When enabled, this field speeds up the Power On Self Test (POST) after the system is turned on. If it is set to Enabled, BIOS will skip some items. ECX810 User’s Manual...
  • Page 32 Password every time you boot up. When you select Setup, the system always boots up and prompts for the Supervisor Password only when the Setup utility is called up. APIC Mode APIC stands for Advanced Programmable Interrupt Controller. The default setting is Enabled. ECX810 User’s Manual...
  • Page 33 OS/2 that depends on certain BIOS calls to access memory. The default setting is Non-OS/2. Small Logo (EPA) Show The EPA logo appears at the right side of the monitor screen when the system is boot up. The default setting is Disabled. ECX810 User’s Manual...
  • Page 34 Memory Hole At 15M-16M In order to improve performance, certain space in memory can be reserved for ISA cards. This memory must be mapped into the memory space below 16 MB. The choices are Enabled and Disabled. ECX810 User’s Manual...
  • Page 35 Phoenix - AwardBIOS CMOS Setup Utility SuperIO Device ITEM HELP POWER ON Function BUTTON ONLY Menu Level > KB Power ON Password Enter Hot Key power ON Ctrl-F1 Onboard Serial Port 1 3F8/IRQ4 Onboard Serial Port 2 2F8/IRQ3 PWRON After PWR-Fail ECX810 User’s Manual...
  • Page 36 Enabled. In order to use USB 2.0, necessary OS drivers must be installed first. USB Keyboard/Mouse Support The options for this field are Enabled and Disabled. By default, this field is set to Disabled. ECX810 User’s Manual...
  • Page 37 Onboard Serial Port 2 2F8/IRQ3 ICH Serial Port 1 3E8/IRQ5 ICH Serial Port 2 2E8/IRQ7 PWRON After PWR-Fail This field sets the system power status whether on or off when power returns to the system from a power failure situation. ECX810 User’s Manual...
  • Page 38 Min. Power Saving Minimum power management Max. Power Saving Maximum power management. User Define Each of the ranges is from 1 min. to 1hr. Except for HDD Power Down which ranges from 1 min. to 15 min. ECX810 User’s Manual...
  • Page 39 You may select the percent of time that the clock runs. Power On by Ring This field enables or disables the power on of the system through the modem connected to the serial port or LAN. ECX810 User’s Manual...
  • Page 40 When an I/O device wants to gain the attention of the operating system, it signals this by causing an IRQ to occur. When the operating system is ready to respond to the request, it interrupts itself and performs the service. ECX810 User’s Manual...
  • Page 41 MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card. Maximum Payload Size The default setting of the PCI Express Maximum Payload Size is 4096. ECX810 User’s Manual...
  • Page 42 Temperatures/Voltages These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only values as monitored by the system and show the PC health status. ECX810 User’s Manual...
  • Page 43 This field enables or disables the auto detection of the PCI clock. Spread Spectrum Modulated This field sets the value of the spread spectrum. The default setting is Disabled. This field is for CE testing use only ECX810 User’s Manual...
  • Page 44 Select this option to exit the Setup utility without saving the changes you have made in this session. Typing “Y” will quit the Setup utility without saving the modifications. Typing “N” will return you to Setup utility. ECX810 User’s Manual...

  • Page 45: Drivers Installation

    – Wind River Linux* 2.0 – Wind River VxWorks* 6.6 – FreeBSD* 6.2 The Driver CD that comes with the board contains software drivers for Windows XP Embedded. The path location of the drivers in the CD is \intel\EP80579. ECX810 User’s Manual...
  • Page 46 DRIVERS INSTALLATION This page is intentionally left blank. ECX810 User’s Manual...

  • Page 47: Appendix

    (argc != 2) printf(" Parameter incorrect!!\n"); return 1; if (Init_W627EHG() == 0) printf(" Winbond 83627HF is not detected, program abort.\n"); return 1; bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); EnableWDT(bTime); return 0; //=========================================================================== ECX810 User’s Manual...
  • Page 48 = Get_W627EHG_Reg( 0xF5); bBuf &= (!0x08); Set_W627EHG_Reg( 0xF5, bBuf); //count mode is second Set_W627EHG_Reg( 0xF6, interval); //set timer //=========================================================================== void DisableWDT(void) Set_W627EHG_LD(0x08); //switch to logic device 8 Set_W627EHG_Reg(0xF6, 0x00); //clear watchdog timer Set_W627EHG_Reg(0x30, 0x00); //watchdog disabled //=========================================================================== ECX810 User’s Manual...
  • Page 49 Init_Finish; W627EHG_BASE = 0x00; result = W627EHG_BASE; Init_Finish: return (result); //=========================================================================== void Unlock_W627EHG (void) outportb(W627EHG_INDEX_PORT, W627EHG_UNLOCK); outportb(W627EHG_INDEX_PORT, W627EHG_UNLOCK); //=========================================================================== void Lock_W627EHG (void) outportb(W627EHG_INDEX_PORT, W627EHG_LOCK); //=========================================================================== void Set_W627EHG_LD( unsigned char LD) Unlock_W627EHG(); outportb(W627EHG_INDEX_PORT, W627EHG_REG_LD); outportb(W627EHG_DATA_PORT, LD); Lock_W627EHG(); ECX810 User’s Manual...
  • Page 50 (W627EHG_BASE) #define W627EHG_DATA_PORT (W627EHG_BASE+1) //=========================================================================== #define W627EHG_REG_LD 0x07 //=========================================================================== #define W627EHG_UNLOCK 0x87 #define W627EHG_LOCK 0xAA //=========================================================================== unsigned int Init_W627EHG(void); void Set_W627EHG_LD( unsigned char); void Set_W627EHG_Reg( unsigned char, unsigned char); unsigned char Get_W627EHG_Reg( unsigned char); //=========================================================================== #endif //__W627EHG_H ECX810 User’s Manual...

Table of Contents