Arbor Technology Victoria Bench with Back Rest Manual

Download this manual

01945 410950 support@arborgardensolutions.co.uk

http://www.arborgardensolutions.co.uk

Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR

Before you commence the assembly process, we recommend that you read these

instructions thoroughly beforehand to familiarise yourself with the assembly process and to

also check that you have the correct components. If for any reason you need assistance,

you can find our contact details on the top of page of these instructions.

We highly recommend that any assembly is carried out on a flat, level surface if possible

and that you use another person to assist you if necessary.

You can check our

Package contents

1x Bench top

2x Bench frames

2x Cross braces

M8 coach screws

Cover caps

Victoria Bench with Back Rest

YouTube channel

Please click here

for assemble video.

Tools required

10mm socket or spanner

Need help?

Do you have a question about the Victoria Bench with Back Rest and is the answer not in the manual?

Page 1 Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR Victoria Bench with Back Rest Before you commence the assembly process, we recommend that you read these instructions thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have the correct components.
Page 2 01945 410950 support@arborgardensolutions.co.uk http://www.arborgardensolutions.co.uk Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR Step 1 Step 2 Place one of the bench A-frames centrally against the fixing batten ensuring that the gap at the bench edge is the same Lay one of the bench seats face down on the flat on both sides.
Page 3 01945 410950 support@arborgardensolutions.co.uk http://www.arborgardensolutions.co.uk Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR Step 5 Step 6 Ensure that the brace is lined up centrally on the bench For a 5ft to 8ft set, place a shorter brace aligned and attach it to the A-frame with a coach screw.
Page 4 Secure back panel via two pilot holes, on both sides. Your Victoria Bench with Back Rest are now completed! We hope that you found your product quick and easy to assemble but if not and you require further assistance or have any questions you can contact us via details above.