Download Print this page
York 354690 Operating Instructions

York 354690 Operating Instructions

Protimeter surveymaster

Advertisement

Quick Links

Battery Low Indication:
Whenever the battery is low, there will appear a battery low indication
symbol on the screen (bottom right). This indicates that the battery is
low and should be replaced soon. The unit will continue to perform in
battery low condition within the specified accuracy and turns off when
the battery reaches the limit.
Holding/Freezing the Reading:
While measuring, if the reading needs to be frozen for any observation,
press the power button during measurement. A text "HOLD" will be
displayed on the screen.
9. Battery Replacement
A 550mAh battery will last continuously for more than 20 hours for a
Surveymaster in operation. A Battery Low indication on the screen
indicates that the battery needs to be changed in a short time.
Remove the screw assembled to fix the battery lid on the back side of
the unit.
Slide the battery lid downwards applying a little pressure with the thumb
to open the battery compartment.
Remove the battery and replace. Care must be taken to ensure that the
polarity is correct. Place the battery in side the compartment.
Follow us!
Prospect House, George Cayley Drive, Clifton Moor, York, England YO30 4XE
York Survey Supply Centre
@York_Survey
E-Mail: sales@yorksurvey.co.uk
@York_Survey
Ref:.. \operat98\instructions 19\354690.qxp 17-01-19
10. Technical Specifications
Operating Conditions:
Operating temperature range: 0°C to 50°C
Humidity: 0 to 90%RH, non-condensing
Measurement Specifications:
Moisture measurement:
For integrated and remote pin probes:
Strong and reliable integrated pins with a cap to protect
Pin measurement range (%mc in wood/%WME) -
7.9 to 99% (readings over 30% are relative)
Non-invasive moisture measurement:
Measurement depth - up to 19mm (¾") deep,
70 to 999, no effect on reading by surface moisture.
11. Physical Specifications
Power: 9V Alkaline 550mAh, battery low indication on LCD
Size: 19 x 6.5 x 5cm (7.5 x 2.5 x 2")
Weight (without battery): 240G
Max. needle depth: For WME pins: 10mm (0.4")
Buzzer: Audible buzzer for key tone and measurement indication, user
configurable
Regulatory compliance: CE, RoHS, ETL
Tel: +44 (0) 1904 692723
Fax: +44 (0) 1904 690385
www.yorksurvey.co.uk
Protimeter
Surveymaster
Code: 354690
Operating
nstructions
©York Survey Supply Centre 2019

Advertisement

loading

Summary of Contents for York 354690

  • Page 1 Place the battery in side the compartment. Code: 354690 Operating nstructions Follow us! Prospect House, George Cayley Drive, Clifton Moor, York, England YO30 4XE York Survey Supply Centre Tel: +44 (0) 1904 692723 Fax: +44 (0) 1904 690385 @York_Survey E-Mail: sales@yorksurvey.co.uk...
  • Page 2 Measure mode calibration. Hold the Calcheck across the recalibration after this period. electrode pins as shown. A correctly calibrated Surveymaster will read 18.2 ±1.0. Contact York Survey Supply Centre if the instrument is Only operate the measuring instrument properly, for it’s intended reading incorrectly.