XP Metal Detectors DEUS II RC Quick Start Manual

RC
V1.0 of the
Tones - Threshold and tones settings
04 DISCRI 90
TONES
T.ID G.ID
4 TONES
B.CAPS
NOTCH 1
EXPERT
6.0
76
84
T.BREAK TONE 1 VOL
6.0 161 HZ 7
Full tones
05 DISCRI 90
TONES
T.ID G.ID
FULL
TONES
B.CAPS
NOTCH 1
EXPERT
Full tones - Threshold and volume settings
6.0
35
60
84
T.BREAK TONE 1 VOL
6.0 ---- 7
Offset Full tones
05 DISCRI 90
OFFSET FT
T.ID G.ID
5
B.CAPS
NOTCH 1
EXPERT
Threshold
(Only with Pitch mode ON)
MENU 90
THRESHOLD
T.ID G.ID
2
DISCRI IAR I 0
SENSITIVITY I 95
EXPERT
introduces some new features/modifications described below :
Press MENU >
DISCRI
Press to access the
EXPERT
Customize the sound partitioning of the discrimination range. A volume level (0 to
10) and a sound frequency (comparatively low- or high-pitched) is assigned to each
part of the discrimination range.
Press to choose the Tone. With
or the VOLUME (VOL) and set it using + and - .
Volume of the low-pitched tone (tone 1) is the same as the Iron Volume.
With Full Tones, the ground area is audible from -6.4. The discrimination setting acts
as a "tone break," and the Iron Volume setting adjusts the volume of ground and
ferrous below the discrimination level.
From Full Tones >
EXPERT
Customize the sound partitioning of the discrimination range for Full Tones and Ad-
just volume levels of each tone independently.
Press to choose the Tone. With
or the VOLUME (VOL) and set it using + and - .
(Only with Full Tones mode ON)
the OFFSET FT feature allows the user to shift the "Full Tone" audio frequencies of
targets with a signature just above the Discrimination threshold, in order to better
differentiate them audibly from iron.
0 = no offset
40 = all targets above discrimination will sound with the same high tone.
The tone of the Threshold (and the deepest / smallest targets) can be modified from
150 to 603 Hz. Press
> . Choose
EXPERT
MULTI TONES
.
5 = (default value) creates a little offset
and adjust it with
EXPERT
2 Tones - 3 Tones - 4 Tones - 5 Tones.
screen.
, select the TONE BREAK (T. BREAK)
, select the TONE BREAK (T. BREAK)
-
+
or .
V1.0
1