Advertisement
Installation Guide
Setting Time
When the LCD is blank screen, press
at the bottom left of the screen, we can set the time, the flash characters can be edited, use the ▲ and ▼ keys to
adjust the value of each digit, and use the
until the character stops flashing, the new time is saved. (Note, Setting date and Setting Time can be done
continuously.)
Figure 5: Setting Time
Reset
If you need clear historical data, please use a small pointed tool to press the reset button until all characters are
displayed in 88-88-88 and then loosened.
Figure 6: Reset
key continuously to enter the time setting screen, when H is displayed
key to advance to the next digit. When done, wait for about 30s
Time Display
(hours, minutes, seconds)
1104-09-002-M Rev E
transtector.com
Advertisement
