Summary of Contents for MAKO TOOLS SROM 1186
- Page 1 Instruction Manual RANDOM ORBIT SANDER Model SROM 1186 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools.
- Page 2 Product Features: 1. On/Off Switch 2. Speed Selector 3. Base Pad 4. Dust Collection Box...
- Page 3 Continued use after partial failure, or the use with the improper accessories will void the warranty. This warranty excludes all Mako accessories. MAKO TOOLS ARE FOR DIY USE ONLY. THEY ARE NOT DESIGNED OR APPROVED FOR INDUSTRIAL OR COMMERCIAL USE.
-
Page 4: Table Of Contents
CONTENTS: General Safety Rules o Work Area safety o Electrical Safety o Personal Safety o Power Tool Use and Care o Service Mako Random Orbit Sander Safety Instructions Mako Random Orbit Sander Operating Instructions Maintenance & Cleaning ... -
Page 5: Work Area Safety
GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. -
Page 6: Service
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. -
Page 7: Mako Random Orbit Sander Operating Instructions
MAKO RANDOM ORBIT SANDER OPERATING INSTRUCTIONS: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serous injury. WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. - Page 8 Adjust the sanding speed by means of the wheel at the front of the tool – Slow Speed (1) to High Speed (6). The required sanding rate will depend on the material you are working on. After longer periods of use at slower speeds, allow the machine to cool down by running it for approximately 3 minutes at maximum speed with no load.
-
Page 9: Load Speed
TECHNICAL DATA ORBITAL SANDER SROM1186 Voltage rating AC 230-240V,50Hz Power rating 420W 6000-12000min No-load speed n Sanding pad size 125mm diameter...