ALI-QVR5116H and ALI-QVR5132H 5MP Hybrid+ Video Recorders Quick Setup Guide
This guide provides instructions to initially setup the ALI-QVR5116H and ALI-QVR5132H digital video recorders (DVRs) for AHD, HD-TVI,
HD-CVI and CVBS analog cameras and IP cameras. The ALI-QVR5116H DVR provides video inputs for up to 16 analog cameras, and the
ALI-QVR5132H provides video inputs for up to 32 analog cameras. Features include:
Supports H.265 Pro+ / H.265 Pro / H.265 video compression
•
Supports HD-TVI / AHD / CVI / CVBS / IP video input
•
Supports a maximum of 2600 feet for 1080p and 3900 feet for 720p HD-TVI signals
•
Supports 4 HDDs up to 10TB each. Supports RAID 0, 1, 5, 6, 10, and eSATA interface
•
Supports POS triggered recording and POS information overlay
•
For more information, refer to these documents - available at http: // www.alibisecurity.com / resources.html:
ALIBI Embedded Digital Video Recorder Firmware V4.20.00 (or later) User Manual
•
ALIBI™ Tools Utility Installation and User Manual
•
ALIBI™ Witness 2.0 Smartphone App - Quick Start Guide
•
ALI-QVR5116H and ALI-QVR5132H Front Panel
Power LED
Item
Usage
Power LED
Indicator turns green when DVR is powered up.
Status
STATUS indicator lights in red when HDD is reading / writing.
TX / RX
LED indicator blinks green when network connection is functioning properly.
USB Interface
This port can be used for a USB mouse or USB flash memory devices.
ALI-QVR5116H Back panel
VGA Audio Out
CVBS Video Out
Camera Audio In
Audio Line In
Camera video inputs
USB
Video Out - HDMI (2), VGA
1
Status
USB Interface
TX / RX
ALI-QVR5116H front panel
eSATA
RS-485,
Alarms IN/OUT
RS-232
Power connector
LAN (2)
Ground
ON/OFF switch
ALI-QVR5132H Back panel
Audio Line In
Camera Audio IN
Item
eSATA
RS-232 Interface
VIDEO OUT
(CVBS, VGA, HDMI)
LINE IN
RS-485, ALARMS IN / OUT
Power connector
ON / OFF Switch
GROUND
LAN Interface
USB interface
AUDIO OUT
HD-TVI video inputs
RS-485, ALARMS IN / OUT TERMINALS
Fan outlet
ALI-QVR5116H
VGA Audio Out
CVBS Video Out
RS-485, Alarms IN/OUT
RS-232
Camera video inputs
HDMI (2)
LAN (2)
Description
Connects external SATA HDD, CD / DVD-RW
DB9 (male) connector for RS-232 devices
CVBS - BNC connector for video output
VGA - DB15 connector for VGA compatible monitor. See specifications for supported resolutions.
HDMI - Two HDMI connectors for an HDMI compatible monitors. See specifications for supported resolutions.
RCA connector for audio input
See below, next topic
AC 100V ~ 240V power supply.
Switch for powering the device on or off
Terminal for ground. Connect to earth ground before powering on the DVR.
2 x 10 / 100 / 1000BASE-T Ethernet network interface
Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).
CVBS AUDIO OUT - RCA connector for audio output. This connector is synchronized with CVBS video output
VGA AUDIO OUT - RCA connector for audio output. This connector is synchronized with VGA video output
HD-TVI interface for video input
ALI-QVR5132H
eSATA
VGA
Fan outlet
Power connector
USB
Ground
ON/OFF switch
ALI-QVR5116-5132H_SQ
200114
Need help?
Do you have a question about the ALIBI ALI-QVR5116H and is the answer not in the manual?
Questions and answers