Summary of Contents for Pard TA Series
- Page 1 PARD TA LRF Thermal Handheld with Laser Rangefinder Additional Manual May 2023 Applies to New Zealand Market...
- Page 2 PARD. Visit pard.co.nz and look for ‘How to videos’ under the Support Menu Support If you have any questions or issues with your device, please contact us via the pard.co.nz website Some variations may exist due to variations in the firmware This manual is for New Zealand Only.
- Page 3 There is always variation as the laser isn’t exactly in the main thermal scope lens as it is offset You can adjust it yourself To do this you will need a device that can see the laser – say a PARD 008, DS35, 007 or a True Night Vision device Aim the thermal LRF at a target at the range you want to calibrate it too.
- Page 4 Check if the aiming box (Thermal Scope) and the Laser itself (in the night vision scope) are pointing at the same place. If it is not then this is how you move the aiming box 1. Turn on LRF 2. Open Main Menu 3.