1. Manuals
  2. Brands
  3. PierDeco Manuals
  4. Bathroom Fixtures
  5. AQUAMASSAGE PD-875
  6. Owner's manual

PierDeco AQUAMASSAGE PD-875 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PD-875
Owner's manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AQUAMASSAGE PD-875 and is the answer not in the manual?

Questions and answers

Related Manuals for PierDeco AQUAMASSAGE PD-875

Summary of Contents for PierDeco AQUAMASSAGE PD-875

  • Page 1 PD-875 Owner’s manual...
  • Page 2 PD-875 Stainless steel rain head with anti-scale jet 2 series of anti-scale body jets Stainless steel handshower 4 volume controls 81¾” HEIGHT Thermostatic ½’’ cartridge with safety lock 30 l/min max (8 GPM max) 6” WIDTH TECHNICAL SPECIFICATIONS This shower column is easy to install and can be connected to your standard plumbing. Minimum Pressure : 2.8 bars (40 PSI).
  • Page 3 INTRODUCTION This owner manual will help you to enjoy your new AQUAMASSAGE Shower column as well as show you how to install, clean and maintain it. WE SUGGEST THAT YOU USE THE SERVICES OF A LICENSED PLUMBER OR CONTRACTOR TO INSTALL YOUR NEW SHOWER COLUMN. IMPORTANT NOTICE BEFORE INSTALLING THE PRODUCT •...
  • Page 4 INSTALLATION During the installation manipulate the tools and shower column with great care to avoid damages and scratches. Shut off the water at the main before starting the installation. Step 1 is to connect the shower head to the body of the column.
  • Page 5 Please see our video on Youtube to follow the instructions in order to maintain your thermostatic cartridge. The temperature of the shower column is preset at 38°C pierdeco.com/youtube (100°F). MAINTENANCE To preserve the look and finish of your shower column, you should dry the shower column after each use with a dry and clean cloth.
  • Page 6 TROUBLESHOOTING PROBLEM DIAGNOSTIC Water temperature is not hot Press on the push buton on the top of the thermostatic handle and enough. turn counterlockwise. The water heater temperature is set at 60°C (140°F). Make sure that there is no air in the water pipes. Noise is coming from the water Look for air pockets in your plumbing .
  • Page 7 In no event will AQUAMASSAGE or PierDeco design Inc. will not be responsible for any other incidental PIERDECO DESIGN INC. or consequential damages attributable to a product defect or to the...
  • Page 8 10-F-16...

Table of Contents