Philips LX7100SA/22 Service Manual page 9

DISMANTLING INSTRUCTIONS
Dismantling of the Tuner Board and Main Board and AVC Board
1) Loosen 6 screws A to remove the Cover Top (pos 260).
- 2 screws each on the left & right side (see Figure 1)
- 2 screws on the rear (see Figure 2)
- See Service position A
2-1
2) Remove 3 screws B and uncatch 2 catches B1 (see Figure
2) to loosen the Tuner Board (pos 1101).
Figure 1
Figure 2
Dismantling of the Tuner Board and Main Board and AVC Board
3) Remove the Bracket PCB Mains (pos 259) by pressing
the catch C1 inward and slide it up in the direction as
shown in Figure 3.
5) Remove 2 screws G (see Figure 4) to loosen the Bracket
AV PCB (pos 255).
2-1
4) Remove 1 screw C (see Figure 2) and uncatch 2 catches
C2 (see Figure 4) to loosen the Main Board (pos 1104-B).
- See Service position B
Figure 3
6) Remove 6 screws E and 2 screws F (see Figure 2) to
loosen the Plate Rear (pos 251) and AVC Board (pos
1102).
- See Service position D
Figure 4