Table of Contents
Advertisement
Section 3 - Configuration
If you click on Edit or Add Rule, the following options will appear:
Name
Enter a name for the rule. Alternatively, select the protocol/
Application Name from the drop-down menu. Depending on
the requested service, the router redirects the external service
request to the appropriate internal host.
Local IP
Enter the IP address of the computer on your local network
that you want to direct the incoming service to. Alternatively,
select the device from the drop-down menu.
Protocol
Select the protocol of the traffic to allow or deny (TCP, UDP,
Both, or Other).
Protocol Number
If you entered Other above, enter the protocol number. Refer
to https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml for Assigned Internet Protocol
Numbers.
External Port
Enter the public port you want to open.
Internal Port
Enter the private port you want to open.
Schedule
Use the drop-down menu to select the time schedule during
which the rule will be active. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 86 for more information.
D-Link G416 User Manual
79
Advertisement
Table of Contents
