Download Print this page

Connects2 CTVIMPO03 Quick Start Manual

Video in motion interface for porsche vehicles

APPLICATION

Porsche Cayenne

Porsche Panamera

For vehicles with PCM 3.1 Navigation OEM systems

• Provides video-in-motion functionality to the vehicle's OEM display

• Function can be activated via DIP switch or triggered with included cable

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This

instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the

vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.

Video in Motion Interface

2011 - 2015

2009 - 2013

DISCLAIMER

CTVIMPO03

for Porsche Vehicles

Note: Application data is subject to change at any time

CTVIMPO03_IG_en-GB_v1

Table of Contents

Do you have a question about the CTVIMPO03 and is the answer not in the manual?

Page 1 CTVIMPO03 Video in Motion Interface for Porsche Vehicles APPLICATION Note: Application data is subject to change at any time Porsche Cayenne 2011 - 2015 Porsche Panamera 2009 - 2013 For vehicles with PCM 3.1 Navigation OEM systems FEATURES • Provides video-in-motion functionality to the vehicle’s OEM display •...
Page 2 Please ensure that the correct tools are used during the installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product.
Page 3 For further help and support, please contact us directly at support.connects2.com/tickets/technical and fill out a support ticket with the full details of your issue.
Page 4 SPECIFICATIONS Operating voltage 10.5 – 14.8V Stand-by power drain <2mA Operation power drain ~60mA Power consumption ~0,08W Temperature range -30°C to +80°C Weight Box Measurements (mm) 76 (W) x 27 (H) x 54 (D) mm CTVIMPO03_IG_en-GB_v1...