Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
RHINO CART HAND TURNTABLE - THT4020
TABLE OF CONTENTS:
•
Specifications
•
Part List
•
Assembly Instructions
•
Maintenance
•
Safety
•
Limited Warranty
SPECIFICATIONS
PN
Tabletop Size
20" x 20"
THT4020
508 x 508 mm
Tabletop
Thickness
0.472"
12 mm
www.StrongHandTools.com | 800.989.5244 | sales@stronghandtools.com | California U.S.A.
Hole
Grid Pattern
Diameter
0.625"
2" x 2"
15.88 mm
50.8 x 50.8 mm
Load
Weight
Capacity
55 lb
44 lb
25 kg
20 kg
Advertisement
Summary of Contents for StrongHandTool BUILDPRO THT4020
- Page 1 ASSEMBLY INSTRUCTIONS RHINO CART HAND TURNTABLE - THT4020 TABLE OF CONTENTS: • Specifications • Part List • Assembly Instructions • Maintenance • Safety • Limited Warranty SPECIFICATIONS Tabletop Hole Load Tabletop Size Grid Pattern Weight Thickness Diameter Capacity 20" x 20" 0.472"...
- Page 2 RHINO CART HAND TURNTABLE Assembly Instructions PN: THT4020 PART LIST Unpack all parts and components and compare them to the parts list below. Read all assembly instructions before beginning assembly. Pre-assembled parts might need some adjustment. Item Name Qty. Item Name Qty.
- Page 3 RHINO CART HAND TURNTABLE Assembly Instructions PN: THT4020 Tools required for assembly: Allen wrench, Phillips screwdriver and Pliers. Use two Flat Head Screws (F) to affix the Slide Connecting Tube (B) into Tube Adapter Receiving Tube Adapter (A) on the Rhino Cart. (A) and align the holes before locking with Screw (H), Nuts and Washers (G).
- Page 4 RHINO CART HAND TURNTABLE Assembly Instructions PN: THT4020 Tilt Locking Pin Rotary Locking Pin Adjusting Nut Loosen / tighten the Handle Screw to adjust Handle Screw the height and extension of the tabletop. Tighten the Nut to adjust the rotation tension / resistance of the tabletop.
Need help?
Do you have a question about the BUILDPRO THT4020 and is the answer not in the manual?
Questions and answers