2. Back Cover assembling Guide
(1) Place the Back Cover on SET.
(2) Push the back cover's left side with one-hand(Close the latch 10 EA(left) from down
to up direction.) and Check the gap Module to B/C after assembly.
(3) Push the back cover's left side with one-hand(Close the latch 10 EA(right) from down
to up direction.) and Check the gap Module to B/C after assembly.
Click
(4) Tighten the Screw 12 EA(Back side 8 EA + bottom side 4 EA)
OLED77ZX Latch 20 Point
(Push about 50mm above the hole.)
- 17 -
Copyright ©
Only training and service purposes.
LG Electronics Inc. All rights reserved.
Click