Galvin Specialised Wallgate ALM-08W Product Installation Manual

Galvin Specialised Wallgate ALM-08W Product Installation Manual

Anti-ligature, anti-vandal polycarbonate mirror with solid surface surround

Advertisement

Quick Links

®
Wallgate
Anti-Ligature, Anti-Vandal Polycarbonate
Mirror with Solid Surface Surround
PRODUCT CODES:
ALM-08W

SPECIFICATIONS

Anti-ligature, extremely robust polycarbonate mirrors with solid surface surrounds. The single piece
surrounds encapsulate a tough, high grade scratch-resistant polycarbonate mirror.

TECHNICAL DATA

Fixings:
Material:
Finish:
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.

MOUNTING DETAILS

Warning: The mirror must be installed onto a flat surface. Tightening against a non flat
surface may result in damage to the solid surface casting. Do not remove the
protective plastic film on the mirror until all the building work is complete to avoid
accidental damage.
Basin fixing studs, fixing washers and basin lock nuts are supplied
Hard Polyester Solid Surface
Plaskolite Polycarbonate Mirrored sheet with Armadillo Scratch Resistant Coating
Silk – Gloss Polish
ALM-08W
th
Version 1, 6
April 2021, Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wallgate ALM-08W and is the answer not in the manual?

Questions and answers

Summary of Contents for Galvin Specialised Wallgate ALM-08W

  • Page 1 Plaskolite Polycarbonate Mirrored sheet with Armadillo Scratch Resistant Coating Silk – Gloss Polish Finish: NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. MOUNTING DETAILS Warning: The mirror must be installed onto a flat surface. Tightening against a non flat surface may result in damage to the solid surface casting.
  • Page 2 Version 1, 6 April 2021, Page 2 of 5 INSTALLATION 1. Drill attachment holes 2. Insert studs to the mirror Drill ø15 mm holes in the wall to suit the Fit the four M10 fixing studs to the M10 fixing studs. The positions are threaded inserts on the back of the marked in the figure above.
  • Page 3 Version 1, 6 April 2021, Page 3 of 5 5. Attach a second lock nut and apply anti-pick mastic Fit a second lock nut on each stud and tighten to 10Nm against the first nut holding that nut with a spanner to ensure it does not tighten beyond the torque it has already been tightened to.
  • Page 4 − Do not use window-cleaning sprays, kitchen scouring compounds or other chemicals to clean the mirrored sheets. − Replacement Polycarbonate mirrors are available, contact Galvin Specialised sales for part numbers. Polishing − A surface gloss can be maintained by occasionally using a flannel cloth and a good plastic cleanser or polish, such as Johnson's Pledge.
  • Page 5 Version 1, 6 April 2021, Page 5 of 5 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.

Table of Contents