Table of Contents
Advertisement
■ LED Array Disassembly
(1) Disassemble the Connector from LED Array.
(2) Separate LED Array from Cover Bottom (using a sharp tool).
(3) Remove the Double Tape from Cover Bottom.
■ LED Array Assembly
Step 1. Attach the Double Tape.
(1) Attach the Double Tape in Guide Line of Cover Bottom (5 EA).
(2) Remove the Protect Film of the Double Tape.
Step 2. Attach LED Array.
NG
(1) Attach the LED Array to Cover Bottom following the Guide Embo (with round hole).
(2) Press the surface of the LED Array to fix.
(3) Connect the CNT to the LED Array.
* Finish the Attached LED Array (4 EA)
*C/Bottom Guide Line
* Finish the Attached Double Tape (4 EA)
OK
- 29 -
Copyright ©
LG Electronics Inc. All rights reserved.
Only training and service purposes.
Advertisement
Table of Contents
