Table of Contents
Advertisement
Timer Recording
This Recorder can be programmed to record up to 8 pro-
grams within a period of 1 month.
Press TIMER REC.
1 1
The Timer Record menu will appear.
Timer Record
Media
PR
Date
DVD
9
16/05 Sun
C07
OK
TIMER REC
• Media – Choose a media (DVD or VCR).
• PR – Choose a memorized program number, or
one of the external inputs from which to record.
• Date – Choose a date up to 1 month in advance,
or select a daily or weekly program.
• Start Time – Set the recording start time.
• End Time – Set the recording end time.
• Mode – Choose a record mode.
DVD: SP, LP, EP, XP, or AT (Auto)
VCR: SP, LP, AT (Auto)
AT (Auto) mode determines how much time is
available on the disc or tape and switches record
mode, if necessary, to complete recording the
program. AT mode cannot be selected when
VPS/PDC is ON.
• VPS/PDC – The VPS/PDC system automatically
adjusts the recording time so that even if a pro-
gram is not running to schedule, you won't miss
it. For VPS/PDC to work properly, you must input
the correct announced time and date of the pro-
gram you want to record.
Note that VPS/PDC may not work with every sta-
tion.
otes
• Stations that use VPS/PDC typically include
VPS/PDC information in the teletext TV guide
pages. Please refer to these pages when set-
ting a timer recording.
• This recorder takes approximately 20 seconds
to switch on and start recording. This means
that when using VPS/PDC, there may be
instances where the beginning of the program
is not recorded.
The recommendable recordable DVD discs
DVD-R
SONY (8x, 16x)
SONY (2.4x, 4x, 8x, 16x)
TDK (4x, 8x)
Verbatim (4x, 8x)
Panasonic (2x, 4x)
-
198 min Free
SP
VPS/
Start Time
End Time Mode
PDC
10:07
11:00
SP
ON
Timer Record List
Close
DVD+R
TDK (4x)
Maxell (1x, 2x, 4x)
Mitsubishi (4x, 8x)
Ricoh (2x, 4x, 8x)
-
Enter the necessary information for your timer
2 2
recording(s).
• b / B (left/right) – move the cursor left/right
• v / V (up/down) – change the setting at the cur-
rent cursor position
• Press RETURN (O) to exit the Timer Record
menu.
• Press TIMER REC to display Timer Record List.
Press ENTER to save the program.
3 3
The Timer Record List will appear.
Press RETURN (O) to exit the Timer Record
4 4
List.
Make sure that you load a recordable disc or
5 5
tape and press POWER to switch your unit to
Standby.
otes
• The Timer indicator lights on the front panel display.
• If the Disc and Tape indicator are blinking, either no disc
or tape is loaded, or the loaded disc is not recordable.
• The Recorder will record the audio according to the cur-
rent TV tuner setting (Stereo, Mono or Bilingual).
Use the AUDIO button to set the audio before switching
the Recorder to Standby mode.
•
You must press POWER to stop the Timer Recording.
• The Recorder will automatically power off when the
Timer Recording ends.
If the unit is DVD mode when the VCR timer recording
ends, the unit will not automatically power off.
• There is a short delay when a timer recording finishes to
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very beginning of the later program may not be recorded
• If you wish to watch the DVD playback during the VCR
timer recording, press DVD (or DVD/VCR) to change to
DVD mode and perform the DVD playback. You cannot
playback the VCR during the DVD timer recording.
DVD-RW
DVD+RW
Victor (1x, 4x)
SONY (2.4x)
TDK (2.4x)
TDK (2x)
Philips (4x)
Mitsubishi (2x)
Ricoh (2.4x)
-
HP (2.4x, 4x)
.
DVD+R(DL)
Mitsubishi (2.4x)
Maxell (2.4x)
-
-
-
45
Advertisement
Table of Contents
