Error symptom
Content
①
Checking order to check remote control
1. Check IR cable condition between IR & Main board.( Check picture number① and ②).
2. Check the Pin 22, Standby Power 3.5V (③)
3. AS checking the Pre-Amp(IR LED light) , the power is in ON condition, an Analog
Tester needle should move slowly, otherwise, it's defective.
D. Function error
Remote control operation checking method
②
Established
date
Revised
date
③
Copyright © 2020 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.