Advertisement
Quick Links
ON/OFF
Menù
Date/Time
NB: In order to maximize energy savings, the display if no key is pressed, will go into standby,
highlighted by turning off the backlight.
In order to access the controls again, press the key located on the side of the device (Backlight/
Stand by wake up).
When installing, keep in mind that in order for the thermostat to work in Wi-Fi and be controlled
by a smart phone, it must receive a good signal from the Wi-Fi network (metal walls or very thick
walls can reduce the signal). The stationary unit needs 220V power supply.
1) Separate the back docking plate from the thermostat and insert 2 alkaline batteries (1.5V AAA)
into one of the slots, paying attention to polarity. NB: It is possible to insert 2 more batteries in the
second slot to double the operating time of the device.
2) Reposition the docking plate and make sure the thermostat is turned off. Press and hold the ON/
OFF button until the display shows OFF.
GLAM Wi-Fi Thermostat
Read carefully and keep the manual.
Description of monitor and stationary unit keys
Key-
Backlight
Stand by wake up
Key +
Mod. 93003112
Green led ashing fast:
waiting for connection
Blue led slow ashing:
Wi-Fi connection problem
Blue led on:
connected to Wi-Fi
Red led on:
xed unit on
Green led on:
Heating on
ON/OFF
Advertisement
Summary of Contents for Bravo GLAM 93003112
- Page 1 GLAM Wi-Fi Thermostat Mod. 93003112 Read carefully and keep the manual. Description of monitor and stationary unit keys Green led ashing fast: waiting for connection Red led on: xed unit on Blue led slow ashing: Wi-Fi connection problem Green led on: Heating on Blue led on: connected to Wi-Fi...
- Page 2 Installation of the device must be carried out by qualified personnel in accordance with applicable standards and laws. - Disconnect the power supply. - Cover or insulate any energized components. - Ensure that no power is re-energized until installation is completed. A-Type installation A-Type installation If the wires coming from the boiler arrive in a room...
- Page 3 B-Type installation In case the wires of the boiler arrive in a room where the Wi-Fi signal is not available, a reverse installation can be used. In this case, the monitor will be installed on the A-Type installation B-Type installation wall and connected to the wires of the boiler while the fixed unit should be installed in a room where the Wi-Fi signal is present.
-
Page 4: Menu Configuration
Pairing the 2 Units Make sure that both 2 units are turned off. 1) Press and hold the button on the stationary unit until the YELLOW LED lights up (about 5 sec.) 2) Press and hold the button on the thermostat until the display shows RF2 3) Release the button and press it again, the display will show --- If the association was successful after a few moments, the number “01”... - Page 5 Menu Menu Display Description Detected temperature calibration* cl (0) -4 --- +4 Max. value of detectable room tem- ah (35.0) 20°C- 35°C perature ** Min. value of detectable room tem- AL (5.0) 5°c - 20°c perature ** Backlight duration 5/10/15 sec. bl (10) 05/10/15 0.5-3.0 °c...
- Page 6 Wi-Fi CONNECTION In order to control the thermostat from a smart phone, make sure that the thermostat is powered by electricity as described on page 2 and that it is placed where it can receive a good Wi-Fi signal. 1) Download the Smart Life-Smart Living app for iOS or Android , create a new account by following the directions provided or log in if you already have your own account.
- Page 7 The device is compatible with Alexa and Google Home so, after pairing it with your device, you will also be able to change the temperature setting or turn the thermostat on and off using the virtual assistant. RF or Wi-Fi connection problems ( If there are any operating problems or fl ashing symbol appears on the display, turn off the wireless unit (monitor) and check that the stationary unit is properly powered (RED LED on) and that the distance...
- Page 8 Programming via wireless unit (Display) In case it is not possible to use the app for programming, proceed as follows for direct programming on the device. Choose from diff erent types of automatic programming: 1) 7 identical days: 1) 7 identical days: 2) 5 weekdays: 3) Week end: 4) 7 diff...
- Page 9 Mattino Uscita Pranzo Uscita Rientro Notte 10) After completing the Night programming ( ) the next time key is pressed, the 7 days of the week will flash again 11) Press button to save and exit The thermostat is now set and ready for use. The patterns shown below are customizable for both times and temperatures 6 daily phases: Wake up...
- Page 10 Programming 2-3 (5 weekdays - Week End) 1) Turn on the thermostat 2) Press and hold button for about 5 sec to enter programming. 3) The 7 days of the week will fl ash on the display. Press button to switch to the programming of the 5 weekdays 4) Press and release button Mattino...
- Page 11 RESET Automatic programming At any time during programming it is possible to reset all entered values and return temperatures and times to the factory settings. Wake up Out door Back home Out door Back home Sleep Time °C Time °C Time °C Time...
- Page 12 MANUAL Programming If in Menu 6 (see Page 5) you had decided to use the thermostat in EXCLUSIVELY MANUAL mode, any temperature change will have to be made manually using keys. In this case, the device will maintain the set temperature (Ex. 20 °C) regardless of the time of day until you intervene on keys to raise, lower or turn off the device.
- Page 13 WARNINGS AND SAFETY PRECAUTIONS Keep batteries out of reach of children; if swallowed, call a doctor immediately. - Damaged batteries or batteries with leaking liquid may cause skin damage, in which case use gloves. - Batteries must not be short-circuited, disassembled or set on fire; danger of explosion. - Conventional batteries may not be recharged;...
- Page 14 Technical Characteristics Fixed unit Power supply 100-240 VAC - 50/60Hz Output Power free relay output 10A Wireless Frequency 868 MHz (FSK) Wireless transmission distance 100 m in open space Wi-Fi frequency 2,4 GHz Communication protocol TCO/IP, MQTT Operating temperature range 0 °C ~ 50 °C Storage temperature range -10 °C ~ 60 °C...
Need help?
Do you have a question about the GLAM 93003112 and is the answer not in the manual?
Questions and answers