Data Storage - Philips 109S User Manual

Data Storage

(A) Factory preset mode:
This monitor has 10 factory-preset modes as indicated in the following
table:
Mode Resolution
M01 VGA 600x400
M02 VGA 640x480
M03 VGA 640x480
M04 SVGA 800x600
M05 SVGA 800x600
M06 EVGA 1024x768
M07 EVGA 1024x768
M08 1280x1024
M09 1280x1024
M10 1600x1200
(B) User mode
In addition to factory preset modes, the monitor can also provides
additional 10 User-defined modes.
If the input video signal is different from our factory-preset modes,the
new timing data will be automatically stored. However, the displayed
parameters may need to be adjusted. User can adjust the parameters
via OSD, as preceding procedures which already described on
"Adjustment via On-Screen-Display" section.
(C) New mode
The monitor is reversed for 4 new modes in case non-standard video
modes are used.
Frequence
H(KHz) V(Hz)
31.5 70
31.5 60
43.3 85
46.9 75
53.7 85
60.0 75
68.7 85
80.0 75
91.1 85
93.8 75
E
N
17