Download Print this page

Origin live Discovery 2 User Manual

Download this manual

Discovery 2 User Manual

Table of Contents

Page 2: Please Read This First
Many countries especially in Europe post and that it is mated squarely and cleanly. and other parts of the world use 220-240V. The Discovery 2 PSU module must only be used in WARNING :- these regions if 230V is indicated with a black dot.
Page 4: Getting Started
It can be difficult to turn the Earth nut with larger Unpacking phono cables already plugged in therefore this should be done first. The Discovery 2 phono stage is supplied with the Useful Tip :- following items: - If a bare earth wire is used, make sure it is 1.
Page 5: Applying Power
Discovery 2 phono stage it is The Discovery 2 phono state is in a cold state recommended to start with the closest setting to when first powered up. Many audio enthusiasts...
Page 6: Input Gain
It has most effect below 5Hz, which is inaudible to human ears and where excessive displacement of speaker cones can cause damage. The Discovery 2 phono stage has a 3 position gain switch. The least sensitive range is marked as 2.5. Setup is complete It indicates that for a given input signal of 2.5mV...
Page 7: Troubleshooting
PSU module is powered on check that the interconnecting DC cable has been fitted correctly and the connectors have been pushed in and locked into position. (Troubleshooting is a work in progress) ©2020 Origin Live – All rights reserved...