Summary of Contents for IAT IAT-HDMI/VGA/CVBS-H.264 mini decoder
- Page 1 1080P H.264 HDMI VGA CVBS Video Decoder HTTP RTSP UDP streaming receiver User Manual Model: IAT-HDMI/VGA/CVBS-H.264 mini decoder www.ezdiybroadcast.com ia-tecs@hotmail.com www.iat101.com www.peephole-store.com...
- Page 2 1. Connecting to internet router, power on, and then open WEB UI (user interface) from a PC If your PC default IP address is not in 192.168.1.*, Please check appendix I for how to change the IP address 2. Open Google (or IE) and input 192.168.1.169, and use admin for both user name and password Input admin...
- Page 3 Check current Decoder status...
-
Page 4: Address Settings
Address Settings You can buy several decoders, and set the channel up to 4 channels... -
Page 5: Network Settings
Network Settings Check IP address. In case you changed and forgot the IP address, you may press the reset button (located at front panel) for 15 sec for resetting to default setting. - Page 6 Decoder Output Settings...
-
Page 7: Reboot System
Reboot System Note: Please remember to click “ Reboot” every time you make a modification... -
Page 8: Reset System
Reset System Only when you want to set your system back to factory’s default setting, you press reset The system or use a clip press the decoder’s reset button for 10 seconds as the hardware reset... - Page 9 Appendix I: How to change computer IP address to 192.168.1.* Go to control panel and find “ Network and Internet”...
- Page 10 Change adapter settings...
- Page 11 Click properties Click Internet Protocol version 4 (TCP/PV4)
- Page 12 Check if current IP is 192.168.1.*? If it is not …please change it as following Note: You may change the decoder’s IP to 192.168.0.* if you prefer using 192.168.0.* in your PC network. However for the first time using the decoder, you will have to set PC to 192.168.1.* in order to log into the decoder to change its default IP address from 192.168.1.169 to 192.168.0.169 (for example)