1. Bulb cover
3. Remove the socket by pushing it in and turn-
ing it counterclockwise.
1. Socket
1
1
4. Remove the burnt-out bulb.
5. Place a new bulb into position. NOTICE: Do
not touch the glass part of the bulb. Oil
from your fingers or other contamination
will adversely affect the transparency of
the glass, luminosity of the bulb, and bulb
life. Thoroughly clean off any dirt and fin-
gerprints using a cloth moistened with al-
cohol or thinner.
1. Do not touch the glass part of the bulb.
6. Install the socket by pushing it in and turning
it clockwise.
8-59
[ECB00653]
8