Advertisement
Advertisement
Table of Contents
Summary of Contents for camry EH101
- Page 1 HAND DYNAMOMETER USER GUIDE EH101...
-
Page 2: How To Insert The Batteries
OVERVIEW This user guide helps you get started using the Camry Hand Dynamometer easily and correctly. We recommend you check out the link or scan the QR code below for helpful videos and FAQs. HOW TO INSERT THE BATTERIES 1.Turn the device over and slide the battery cover up to remove the cover. -
Page 3: Getting Started
GETTING STARTED Before using, you can adjust the handle up or down by turning the adjustment knob left or right to achieve your ideal grasp. The second joint of the index finger should be at a 90-degree angle to the handle. Meanwhile, turning the handle to the right will raise the handle and is ideal for larger hands. - Page 4 SET UP YOUR DATA 1. Start by pressing the ON/SET button to turn the device on. 2. The user number will blink indicating which user is selected. This device can store up to 19 users. Press the up or down arrow to switch between user profiles.
-
Page 5: Taking A Measurement
4. Last, the age icon will flash on the screen. Press the up or down arrow to increase or decrease the age. Press START to confirm all changes, or press ON/SET to go back. MEASURE YOUR HANDGRIP STRENGTH 1. Hold your hand dynamometer. The base should rest on the first metacarpal while the handle should rest on the middle of the four fingers. -
Page 6: Recalling A Measurement
5. Grip the handle firmly and squeeze to take a measurement. Your max handgrip strength will be captured and displayed on the screen after the measurement is complete. 6. (Optional) Once your measurement is complete, you can press the down arrow/memory button to save your result. RECALLING A MEASUREMENT 1. -
Page 7: Reference Table
REFERENCE TABLE For your reference, a table is included that can be used as a guideline to compare your results with average measurements in your age range (UNIT: LB). MALE FAMALE Weak Normal Strong Weak Normal Strong 10-11 <27.8 27.8-49.4 >49.4 <26.0 26.0-47.6... -
Page 8: Specifications
CARE ● To clean, wipe with a dry cloth. ● Do not use harsh chemicals or cleaners on the device. CAUTIONS ● Take note of the battery polarities when installing and replacing batteries. ● Avoid touching the LED screen. ● If the device will not be in use for an extended period of time, remove the batteries.
Need help?
Do you have a question about the EH101 and is the answer not in the manual?
Questions and answers
Are you able to recalibrate the Camry EH101 Dynamometer? One does not seem to be taking accurate readings.
The Camry EH101 dynamometer does not have a known technical service for calibration, and it is unclear whether its long-term measurement reliability may vary. Therefore, it cannot be reliably recalibrated for accurate readings.
This answer is automatically generated