Advertisement
20V MAX FAST CHARGER
LED CHARGING INDICATORS
WARNING
If at any point during the charging process, none of the LEDs
are lit– remove the battery pack from the charger to avoid damaging
the product. Do not insert another battery.
The LED charging indicators show what charge state the battery is in:
GREEN
RED
BATTERY
LIGHT
LIGHT
INSERTED
INTO CHARGER
ON
OFF
NO
OFF
Blink
YES
ON
OFF
YES
OFF
ON
YES
ON
ON
YES
SAFETY & MOUNTING
THERMAL PROTECTION
When repeatedly using the charger to charge a number of batteries always allow
the charger to cool down before charging another battery. It is recommended
that the cooling down period is not less than 30 to 45 minutes.
When charging a battery that has been discharged during heavy use allow
the battery to cool down before charging. It is recommended that the cooling
down period is not less than 30 to 45 minutes.
A safety feature of this battery system is that if the Battery Pack is too hot to
be charged, the battery charger will NOT start charging and the light will remain
green. When the battery pack has cooled, the charger will start charging.
WARRANTY
If this Benchmark Tool fails due to a defect in material or workmanship within three
years from the date of purchase, return it to any Home Hardware store with the original
bill of sale for exchange. This warranty does not include expendable parts including but
not limited to blades, brushes, belts and light bulbs. This warranty covers defects in
material or workmanship only. It does not cover normal wear and tear, failure due to
abuse/misuse, or defects caused by careless or accidental mishandling.
If this Benchmark product is used for commercial or rental purposes, this warranty
does not apply Need Assistance?
CHARGING STATUS
Charger connected
to power supply
Battery being
charged
Battery fully charged
Battery is charged
but not operational
on tool. This may
indicate defective /
bad contact
on battery.
Charging conditions
are either too hot
or too cold
5350-022
8
Advertisement
