NIX Spectro 2 Quick Start Manual page 9

Turning On
& Charging your Device
The Nix Spectro 2 arrives in a "sleep" state. To wake it up, plug in the
provided USB-C charging cable into the USB port on the device (plug the
other end into a wall adapter or PC). Once charging, the gel sticker located
at the top of the device will illuminate to indicate it's connected to power.
For a full charge, keep your device plugged in for four hours.
You can check the battery level of your device by connecting to the Nix
Toolkit app. Select the device icon in the top right corner of the home page
to see your battery's level. Your device must be connected to the app via
Bluetooth to see this information (see page 10 for details on connecting).
Note: The Nix Spectro 2 does not need to be turned off. It will automatically
hibernate when the Spectro app is closed.
Illuminated gel
sticker upon
charging
9
NIX SPECTRO 2: QUICK START GUIDE