Download Print this page

unios Zenith Quick Start Manual

Inground uplight

Advertisement

Quick Links

Cleaning
Warning: Before cleaning, disconnect from
mains supply and allow luminaire to cool.
1
2
Disposal
Ensure correct disposal of this
product (waste electrical and
electronic equipment)
Edition 18.12.19 | Product design and technical data may be subject to change
FOR WARRANTY INFORMATION VISIT UNIOS.COM/WARRANTY
Please read these installation instructions carefully before installing this luminaire. The luminaire is
designed for installation in accordance with relevant Australian Standards (AS/NSZ 3000).
Installation of this luminaire must comply with local and national regulations. If luminaire is not
installed according to the instructions, the warranty for the luminaire may be void.
unios.com
Page 4/4
Corrosion Protection
It is important to note that care must be taken
during installation or maintenance to ensure that
the surface of the luminaire is not damaged. Any
damage, which is exposed to moisture will result
in corrosion occurring.
Please also note that any chemical applications on the
luminaire will cause corrosion of the surface of the luminaire
and will void the warranty.
ENQUIRIES
+61 8 9248 1888
sales@unios.com
Zenith
Base
2W
Codes
ZENI0002
Class III
IP Rating
Material
Install Person/s
24V DC
65
Aluminium
1x
CAUTION – This product must be installed by a qualified installer
Please read instruction manual carefully before installing luminaire
Surge Protection
For comprehensive protection of a luminaire against electrical surges, surge protection shall be installed
on the mains supply where required to protect luminaires and drivers from transient voltage damage.
For warranty information visit unios.com/warranty
Please read these installation instructions carefully before installing this product. This product must be installed and
maintained by a suitably qualified person/s in compliance with the latest applicable regulations and relevant legislation.
Unios does not warrant any claim based on defects or damage caused by misuse, improper installation, improper
operation and/or modifications carried out by the purchaser or third parties. This product shall not be used as a
'working light' during construction. This will result in the warranty of the product to be void. For warranty duration,
please refer to the data sheet.
Luminaire
A
Canister
A
Edition 18.12.19 | Product design and technical data may be subject to change
unios.com
Page 1/4
INGROUND UPLIGHT
Sizing Variations
Product Code
A
B
ZENI0002
70
35
Canister
100
100
ZENI0002
All measurements are in millimetres.
Parts
1x Allen Key
1x Canister
Power
2 Watts
C
42
53

Advertisement

loading
Need help?

Need help?

Do you have a question about the Zenith and is the answer not in the manual?

Questions and answers

Summary of Contents for unios Zenith

  • Page 1 Unios does not warrant any claim based on defects or damage caused by misuse, improper installation, improper operation and/or modifications carried out by the purchaser or third parties. This product shall not be used as a 'working light' during construction.
  • Page 2 Page 2/4 Page 3/4 Wiring DRIVER Power Source See below 85x85mm Strip 7mm 65-70mm Heat Heat until tin melts Driver Selection Output Driving Forward Product Code Power Current Voltage ZENI0002 24V DC 30-40V Dimming Driver For dimming capabilities, luminaire must be paired with dimmable electronic control gear.

This manual is also suitable for:

Zeni0002