Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Nordic IDTM-710S
- Page 1 CORDED IMPACT DRILL OPERATING MANUAL IDTM-710S...
- Page 2 NORDIC PRODUCT SPECIFICATION Voltage / Frequency: 230-240V ~ 50Hz Rated Power: 710W No-Load Speed: 0-2900rpm Impact Frequency: 0-48,000/min Cable Length: Adaptor Type: SAA Plug GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
- Page 3 NORDIC 2.3 PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.
- Page 4 NORDIC 2.5 SERVICE Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. Special safety instructions for Impact Drill • Check that the ventilation openings on the impact drill are not clogged.
- Page 5 NORDIC • Choice of drilling or percussion drilling You can only use the percussion drill function when the reversing switch is set to right rotation for screwing in and drilling. Set the percussion drill for dercussion drilling or normal drilling on the switch.
- Page 6 NORDIC SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves Wear respiratory protection In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated;...
- Page 7 NORDIC 6. PRODUCT 1. Borchuck 2. Switch, impact drilling / percussion drilling 3. Handle 4. Lock button 5. Cord and plug 6. Power switch 7. Speed adjustment button 8. Reversing switch for right and left aisle 9. Support handle 10. Depth stop 11.
- Page 8 NORDIC PARTS OF IMPACT DRILL 1. Borchuck 5. Cord and plug 2. Switch, impact drilling / percussion drilling 6. Power switch 3. Handle 7. Speed adjustment button 4. Lock button 8. Reversing switch for right and left aisle...
Need help?
Do you have a question about the IDTM-710S and is the answer not in the manual?
Questions and answers