Specifications; Voltage Selection; Ac Power Supply Cord And Ac Plug Adaptor - Sharp QT-222W(S) Service Manual

QT-222W
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
General
Power source
Power consumption
Output power
Speaker
Output terminal
Dimensions
Weight
Radio
Frequency range
Tape recorder
Frequency response
Signal/noise ratio
Wow and flutter
Motor
Bias system
Erase system
Specifications for this model are subject to change without prior notice.
Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage
as follows. Slide the selector with a screwdriver to the appropriate voltage number. (AC 110 - 127 V or AC 220 - 240 V)

AC POWER SUPPLY CORD AND AC PLUG ADAPTOR

92L24801600292
92L24801800222

SPECIFICATIONS

AC 110-127/220-240 V, 50/60 Hz
DC 6 V ["D" size (UM/SUM-1, R20 or HP-2) battery x 4]
7 W
MPO: 3 W (AC operation, 10 % T.H.D.)
RMS: 1.5 W (DC operation, 10 % T.H.D.)
9.2 cm (3-5/8") full range speaker x 1
Earphone: 16-50 ohms (recommended: 32 ohms)
Width: 305 mm (12")
Height: 155 mm (6-1/8")
Depth: 120 mm (4-3/4")
1.48 kg (3.3 lbs.) without batteries
FM: 88 - 108 MHz
SW1: 2.3 - 7.3 MHz
SW2: 7.3 - 22 MHz
MW: 526.5 - 1,606.5 kHz
60 - 12,000 Hz (Normal tape)
40 dB
0.3 % (WRMS)
DC 6 V electric governor
DC bias
Magnet erase

VOLTAGE SELECTION

– 2 –
92L26802125210
92L26802125120