Table of Contents
Advertisement
occur under normal circumstances. Refer to
CHARGING A COOL BATTERY PACK for normal
recharging of batteries. If the charger does not charge
the battery pack under normal circumstances, return
both the battery pack and the charger to your nearest
authorized service centre for electrical check.
CHARGING A COOL BATTERY PACK
Only charge the 36 V Li-Ion battery packs with this
charger. Make sure the power supply is normal
household voltage, 100-240VAX50/60Hz, AC only.
Make sure the battery pack. the battery pack is secured
in the charger before beginning operation.
1.Connect the charger to the power supply.
2.Place the battery pack in the charger, aligning the
raised rib on the battery pack with the groove in the
charger.
3.Slide in the battery pack to be sure contacts on the
battery pack engage properly with contacts in the
charger.
NOTE: After charging is complete, the green charger
LED will remain on until the battery pack is removed
from the charger or charger is disconnected from the
power supply. The battery pack will become slightly
warm to the touch while charging. This is normal and
does not indicate a problem. Do not place the charger
and the battery pack
in an area of extreme hot or cold. They will work best at
normal room temperature.
NOTE: The charger and battery pack should be placed
in a location where the temperature is more than 10°C
8
Advertisement
Table of Contents
