Download Print this page

Greystone Energy Systems CDD Installation And Operating Instructions

Download this manual

INSTALLATION AND

OPERATING INSTRUCTIONS

PRODUCTS

CDD – CO2 DETECTORS

(All transmitters are factory set and calibrated)

NOTE:

This document provides the necessary information for the use and

operation of Greystone CO2 detectors. Greystone Energy Systems Inc.

reserves the right to make design modifications without prior notice.

150 English Drive, Moncton, NB E1E 4G7 Tel: 506-853-3057 Fax: 506-853-6014

E-mail: greystone@nbnet.nb.ca

Visit our Web Site at: www.greystoneenergy.com

Need help?

Do you have a question about the CDD and is the answer not in the manual?

Page 1 NOTE: This document provides the necessary information for the use and operation of Greystone CO2 detectors. Greystone Energy Systems Inc. reserves the right to make design modifications without prior notice. 150 English Drive, Moncton, NB E1E 4G7 Tel: 506-853-3057 Fax: 506-853-6014 E-mail: greystone@nbnet.nb.ca...
Page 2 19.3 cm (7.5”) from the back of the enclosure. WARRANTY: Greystone Energy Systems Inc. will repair, or replace, any product it deems a manufacturers’ defect for a period of one year beyond invoice date, at no charge to the customer, (calibration excluded).
Page 3 CDD SERIES PCB LAYOUT INSTALLATION AND OPERATION To mount the unit, first remove the cover casing by removing the screws. The space unit can be mounted di- rectly to a plaster-type wall or junction box at 100 cm to 150 cm.
Page 4 WIRING DIAGRAMS 24 Vdc supply ,4-20 mA output in a PASSIVE 3-wire configuration 4-20ma 4-20ma 4-20ma 0-10vdc 0-10vdc 0-10vdc AC/DC AC/DC AC/DC - + + + + 24 Vdc 24Vac/dc supply, 0-10Vdc output, A CTIVE 24 Vac supply, 4-20mA output, A CTIVE con- configuration &...