Shield Can Lid Baseband - Sony Xperia tipo ST21i Working Instructions

Replacement

4.15 Shield Can Lid Baseband

Follow the 3.1 – 3.5 Disassembly instructions!
Follow the 4.10 Removal instructions!
Carry out the Removal as described below.
Prepare a new Shield Can Lid Baseband.
Carry out the Installation as described below.
Follow the 4.10 Installation instructions!
Follow the 5.1 – 5.5 Reassembly instructions!
REMOVAL
Unsnap the corners of the Shield Can Lid Baseband by
using a pair of Tweezers and pull upwards to remove it.
Scrap! Not to be reused!
INSTALLATION
Prepare a new Shield Can Lid Baseband.
Press to snap it.
Only the edge of the Shield Can is allowed to press.
1266-1672 Rev 3
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
24(39)