1000 SERIES PRE-MOUNT BRACKETS
Le kit comprend :
Kit contains:
1
Assemblez les cadres avec les barres métalliques.
Assemble the frames with the metal bars.
3
Positionnez l'ensemble entre 2 mon-
tants et fixez les languettes au moyen
d'agrafes ou de vis.
Position the unit between 2 uprights and
fix the strips using staples or screws.
Focal-JMlab
- 108, avenue de l'Avenir - ZI Molina la Chazotte- 42350 La Talaudière - France - www.focal.com
®
1000 IWSUB UTOPIA
Notice d'installation / User Manual
A - 4 languettes de fixation
4 fixing strips
B - 2 cadres plastique
2 plastic frames
C - 2 barres métalliques
2 metal bars
4
Utilisez le passe-câble pour retenir les câbles pendant la
construction. Posez le plâtre. Branchez l'enceinte et cassez les
deux passe-câbles avant d'installer le produit.
Use the cable clip to hold the cables in place during construction.
Install the plaster board. Plug in the loudspeaker and snap off
the two cable clips before installing the product.
Tel. (+33) 04 77 43 57 00 - SCCG - 12/10/2020 - CODO1684
A
2
Clipsez les languettes sur les côtés des cadres en
plastique.
Clip the strips onto the sides of the plastic frames.
B
C
Need help?
Do you have a question about the 1000 Series and is the answer not in the manual?
Questions and answers