Connecting The Psa To Your Computer - Philips ACT200 Product Manual

18 connecting the psa

connecting the psa to your computer

check that the psa is loaded with a suitable battery
(preferably fresh) before you start connecting.
1
connect the supplied usb cable to your computer's
usb port.
press 4 to open the battery compartment. connect
2
the other end of the usb cable to usb in, (found
inside the battery compartment.)
3
turn on the computer.
indicator: lights up green continuously.
buttons on the psa are automatically locked
during usb connection.
4
turn on your psa.