Technical Data; Battery And Charger - AEG BSS18SBL Original Instructions Manual

TECHNICAL DATA

Rated voltage
Tool reception
No-load speed
High speed
Medium speed
Low speed
Impacts per minute
Impact rate
Max torque
Max. diameter bolt / nut
Weight - not including battery pack
Measured values determined according to EN 62841.
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Impact tightening of fasteners of the maximum capacity of the tool
Uncertainty K
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.

BATTERY AND CHARGER

Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
L1820S
Use AEG 18V battery and charger only
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
IMPACT DRIVER SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
IMPACT DRIVER
Wear ear protectors. Exposure to noise can cause hearing loss.
Sawdust and splinters must not be removed while the machine is running.
Compatible charger
When working in walls, ceiling, or floor, take care to avoid electric cables
(not included)
and gas or waterpipes.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by
AL18G
burning them. AEG Distributors offer to retrieve old batteries to protect our
BL1218
environment.
BLK1218
Do not store the battery pack together with metal objects (short circuit
BL18DP2-X5
risk).
BL18DPS
Use only System AEG chargers for charging System AEG battery packs. Do
BL18S
not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or
extreme temperatures. In case of contact with battery acid wash it off
immediately with soap and water. In case of eye contact rinse thoroughly for
at least 10 minutes and immediately seek medical attention.
The product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
product by a person responsible for their safety
Children should be supervised to ensure that they do not play with the product.
Even when the product is used as prescribed, it is still impossible to completely
eliminate certain residual risk factors. The operator should pay particular and
13
RESIDUAL RISKS
BSS18SBL
18 V
1/4" (6.35 mm)
0 - 2900 min
-1
0 - 1950 min -1
0 - 1300 min -1
0 - 4200 min
-1
4200 min
-1
195 Nm
M14
0.8 kg
L = 94.0 dB(A)
p
3 dB(A)
L = 105.0 dB(A)
W
3 dB(A)
a = 12.3 m/s 2
h
1.5 m/s 2
13