Next CORSICA NEST OF TABLES Assembly Instructions

Next CORSICA NEST OF TABLES Assembly Instructions

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY

Tools Needed

Helpline

If you have any problems with this product or require any
replacement fittings please contact Customer Services Tel:
0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be
faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.

PRODUCT INFORMATION

• Made from hollow board & Honeycomb board and particle board with a wood effect foil finish.
• Made in China.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or
damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
CORSICA NEST OF TABLES
CORSICA NEST OF TABLES
CORSICA NEST OF TABLES
CORSICA NEST OF TABLES
ASSEMBLY INSTRUCTIONS
Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CORSICA NEST OF TABLES and is the answer not in the manual?

Questions and answers

Summary of Contents for Next CORSICA NEST OF TABLES

  • Page 1 CORSICA NEST OF TABLES CORSICA NEST OF TABLES CORSICA NEST OF TABLES CORSICA NEST OF TABLES ASSEMBLY INSTRUCTIONS IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY Tools Needed Helpline If you have any problems with this product or require any...
  • Page 2 FITTINGS PARTS STEP ONE 1.Insert 4 x bolts (I) into nuts fixed on panels 2(x2) & 3(x2) and turn bolts (I) clockwise until tight by hands. 2.Insert 8x cambolts (C) into panels 2(x2) & 3(x2) and tighten with a screwdriver. Page 2 of 5...
  • Page 3 STEP TWO 1. Glue and insert 4 x wooden dowels (A) into panels 5 (X2) 2. Attach panels 2 (X2) & 3 (X2) to panels 5 (X2) STEP THREE 1.Attach panels 4 (x2) to panel 1 with 2×screws (F) and tighten with an Allen key (E). STEP FOUR 1.
  • Page 4 STEP FIVE 1.Tighten the panels 5(x2) to panel 1 with 2×screws (F) using an Allen key (E). 2.Turn over the product . STEP SIX 1.Insert 4 x bolts (I) into nuts fixed on panels 7 , 8 , 9 & 10 and turn bolts (I) clockwise until tight by hand.
  • Page 5 1.Tighten the panels 12(x2) to panel 6 with 2×screws (F) using an Allen key (E). 2.Carefully turn over the product . STEP ELEVEN 1. Slide small table under the large table Next Retail Ltd, Desford Road, Leicester, LE19 4AT Page 5 of 5...

Table of Contents