Related Manuals for BT Lab Systems BT2202
Summary of Contents for BT Lab Systems BT2202
- Page 1 A Geno Technology, Inc. (USA) brand name Mini PCR Machine Cat. No. BT2202 1-314-991-6034 info@BTLabSystems.com ♦...
-
Page 2: Important Safety Information
Before operating the instrument, please read this manual carefully. The operator should not attempt to open or repair the instrument, which would void your warranty • and may result in an electric shock. In case of repair, contact BT Lab Systems. • This product is an indoor instrument. -
Page 3: Maintenance
MAINTENANCE Use a neutral soap solution to clean the holes in the base. Do not use strong bases, concentrated alcohols, and organic solvent solutions. There should be no other articles under the machine or its left and right heat dissipation windows. After the machine is used for some time, dust will adhere to the heat dissipation window. -
Page 4: Technical Specifications
TECHNICAL SPECIFICATIONS Normal Working Conditions • Ambient Temperature: 5°C ~ 30°C Relative Humidity ≤70% • • Power Supply: AC110V/AC220V 50Hz Basic Parameters and Performance Single-Step Time Range 1-59m59s (0 is forever) Temperature Range 4 – 99.9˚C Sample Capacity 16 x 0.2ml Max. - Page 5 STRUCTURE Hot Lid Button Power Switch Vent Window LCD Screen Hot Lid Power Socket Page 5 of 12...
- Page 6 OPERATION GUIDE Start Up After the instrument is powered on, the LCD screen will light up. The welcome screen will appear, then the main menu interface. Run File Operation The run file is the PCR amplification program. The running file consists of the temperature and the cycle steps.
- Page 7 2. Create a New File a. Press “New” to enter the new editing interface. Above the temperature curve is the temperature and below is the time. b. Press on the temperature or time to set its parameters by the number keys c.
- Page 8 3. Edit File a. Select the file to be edited in the file library, then press on the “Edit” button. Press on the temperature or time to edit. b. Press the “+Step” button and the “+Cycle” button to add additional temperature and cycle steps.
- Page 9 4. Running File a. Select the file to be run in the file library. Press “Run” to enter the running interface. b. Press “Lid Off” or “Lid On” to switch the hot cover. c. The column to the right of the graph shows the hot lid and module temperature, the current step time, and the total time.
- Page 10 User Management User Management allows new users to be created. Only administrator level users can delete other users. 1. Press the “User” icon in the main interface to enter the user management interface 2. Press “Register” to enter the registration interface. 3.
-
Page 11: Troubleshooting
Touch screen failure Hardware failure Contact BT Lab Systems Power adapter indicator is not lit Bad adapter or host is faulty Contact BT Lab Systems Block is not heated Hardware failure Contact BT Lab Systems Block temperature is too high/ too low Hardware failure... -
Page 12: Warranty
This warranty does not apply to platinum wire and all the accessories. A return authorization must be obtained from us before returning any product for repair on a freight prepaid basis. For any inquiry or request for repair service, please contact BT Lab Systems via the email below. E-Mail: info@BTLabSystems.com TECHNICAL SUPPORT BT Lab Systems offers technical support for all its products.