Audio Selection; Using Your Headset With Playstation; Using Your Headset Wirelessly With A Usb Device - PlayStation PULSE 3D CFI-ZWH1 Instruction Manual

Wireless headset and adaptor
Table of Contents

Advertisement

Audio selection

Mic mute (
To mute the headset microphones, press the mute button on the headset.
To unmute, press the button again. Mute is active when the button shows orange.
Mic monitoring (MONITOR switch)
Mic monitoring is a feature that allows you to hear your own voice, so you can
hear how you sound to your friends. Slide the switch to enable mic monitoring.
You'll hear a beep:
On: high beep
ˎ
Off: low beep
ˎ
When mute is on, mic monitoring is turned off.
Chat and game volume balance (CHAT/GAME buttons)
You can listen to both game audio and chat audio simultaneously. Use the
CHAT/GAME buttons to adjust the relative volume of chat audio versus
game audio. Press the CHAT and GAME buttons at the same time to reset
the relative volume.
Some games may have a chat feature that is incompatible with the CHAT/GAME function.
To change the audio output on your PS5 console, select
ˎ
Settings
> Sound > Audio Output > Output to Headphones.
To change the audio output on your PS4 console, select
ˎ
Settings
> Devices > Audio Devices > Output to Headphones.

Using your headset with PlayStation

You can use the included audio cable to connect your headset to the stereo headphone jack
of the VR headset. This provides all audio processed by PS VR, including 3D audio, if
supported by the game.

Using your headset wirelessly with a USB device

You can use the headset with compatible PCs (Windows® or macOS®) or other devices that
have USB audio output.
Insert the wireless adaptor into a USB Type-A port on your compatible device, and then
turn on the headset.
The CHAT/GAME feature can be used only when the headset is connected to a
PS5 console or PS4 console.
If you move out of range for more than 30 seconds, you'll hear a low beep to indicate
the connection is lost. When you move back into range, you'll hear a high beep to
indicate the connection is restored.
Downloaded from
button)
manualsnet.com
VR
®
search engine
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pulse 3d cfi-zwd1

Table of Contents