Do you have a question about the LISTO 920 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Swiss Timing LISTO 920
Page 1
LISTO 920 User’s Manual 3406.504.02 Version 2.0 Edition June 2012...
Page 2
Swiss Timing Ltd. specifically disclaims any implied warranty of merchantability, quality and/or fitness for any particular purpose. Swiss Timing Ltd. shall not be liable for errors contained in this documentation or for incidental or consequential damages in connection with the supply, performance or use of this documentation.
LISTO 920 INTRODUCTION 1.1 Concept The LISTO 920 is a concentration clock, indicating the amount of time available to athletes before they must perform their discipline. 1.2 General view 1.2.1 Display The LISTO has a pixel-based display of 3 numbers and a yellow flag. All the dots are yellow.
Keyboard connection TRIPOD Tripod fixing 3406.722 LISTO 920 concentration clock 1.2.3 Installation Instruction The LISTO can be installed on a tripod (3/8" UNC thread) or placed on a table. For installation on a tripod, a ‘hot-shoe’ fixing (option) can be used.
Start the countdown / Set up the minutes in the Programming mode STOP / +1'' Stop the countdown / Set up the seconds in the Programming mode PRESET Reset the countdown clock / Selection of the Programming mode 3406.721 LISTO 920 Keyboard Version 2.0 3406.504.02 Page 3...
GETTING STARTED 2.1 Charging the battery A battery charger can be plugged to POWER connector. The LISTO doesn't need to be switched on for charging to take place, but it is possible to charge the LISTO during its use. The charger also acts as external power when the LISTO is in use.
LISTO 920 2.4 Yellow flag configuration The configuration of the yellow flag can be changed unscrewing the LISTO front panel. Figure 7 – Opening the front panel The value can be set using the SW1 pins 1,2,3 located on the PCB (see picture below) By default, the yellow flag is set to 15 seconds.
OPERATION 3.1 Connecting the installation Connections have to be made at the bottom of the LISTO. Figure 10 – Connections overview 3.2 Start to countdown 1. Connecting the installation according Figure 10. 2. Press the START button on the keyboard, the countdown starts. 3.
LISTO 920 ELECTRICAL PROPERTIES 4.1 Power supply The LISTO contains two 6V PB batteries. For the recharge, only use the charger provided (universal entry 100 to 240VAC, 50-60Hz). 4.2 LISTO Connectors pinning Connector Pinning +12 VDC POWER 3PMT DIN Common...
PROPERTIES 5.1 LISTO Technical Features Dimensions (without tripod): 460 x 270 x 95 mm Weight of LISTO 920: 5.8 kg Operating temperature: -15ºC to +45ºC Autonomy of the internal battery at 25° C: Brightness Level AUTO HIGH LISTO 920 15 Hours...
LISTO 920 STORAGE & MAINTENANCE 6.1.1 Test mode The Test mode is switch on when the SW1 pin 4 is in the ‘ON’ position. On the display, all the dots blink simultaneously. Figure 12 – Test mode Version 2.0 3406.504.02...
SUMMARY OF IAAF RULES This is a summary of IAAF rules for concentration time in athletics. It refers to the "IAAF Competition Rules 2004 – 2005" handbook. Please check on the web-site for http://www.iaaf.org rules change. Rule 180.17: An athlete in a field event who unreasonably delays making a trial, renders himself liable to have that trial disallowed and recorded as a failure.
Need help?
Do you have a question about the LISTO 920 and is the answer not in the manual?
Questions and answers