Summary of Contents for Mayer FG-S225
- Page 1 DRY WALL SANDER INSTRUCTION MANUAL RED THROUGH CAREFULLY AND UNDERSTAND THIS INSTRUCTION BEFORE USE...
-
Page 2: Work Area
1.Work area Keep work area clean and well lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.Keep children and bystanders away while operating a power tool. -
Page 3: Personal Safety
Use of a cord suitable for outdoor use reduces the risk of electric shock.If operating a power tools in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 1.2: Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. -
Page 4: Device Application
persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. -
Page 5: Technical Specifications
4. Technical Specifications Model: FG-S225;FG-S225-1;FG-S225-2;FG-S225-3; FG-S225A-1;FG-S225A-2;FG-S225A-3;FG-S225A-4;FG-S225A-5;FG-S225A-6; FG-S225L-1;FG-S225L-2;FG-S225L-3 ;FG-S225L-4;FG-S225E; FG-S180;FG-S180A;FG-S180B; FG-S1200 FG-S225E Rated Voltage:110-120/220-240V Frequency:50/60HZ Rated Power: 710/750/800/850/880/900/950/1000/1050/1150/ 1200/1500/1800/2200/2500/3000W No-load Speed: 800-1750min(FG-S225 Series) 1200-2500min(FG-S180 Series) 1400-3100min(FG-S1200 Series) Sandpaper Dimensions: 180mm(FG-S180 Series) 225mm(FG-S225/FG-S1200 series) 28mm(Triangle model) Safety Standard: II /... - Page 6 5.Structure Overview(FG-S225series) Sandpaper Speed governor Switch Lengthening Bar Handel Locking nut Remove the sandpaper, put the Allen wrench into the hexagon hole in the center of the viscid disc and then rotate anticlockwise to take off the damaged viscid disc. Install the new viscid disc,or add gasket.
- Page 7 Suction regulating wheel Suction adjustment guide: suction adjustment knob can adjust the suction.It is better to put the knob in the first place, and then adjust the suction according to the need.The direction of the large arrow large suction, and vice versa. LED light switch The spring using In multi-topping With vacuum model...
- Page 8 Extend the link between rod and hose Connection between dust bag and hose（With vacuum model） Carbon brush replacement position Removal of head screws The whole...
- Page 9 Structure Overview(Triangle & Circle) Snap jiont Circle pad Snap jiont Triangle Pad This joint adjusts the rotation and closure of the triangular disc Triangle sander paper The whole...
- Page 10 Structure Overview(FG-S180series) Soft start Switch Suction regulating wheel Led light switch Carbon brush replace Replace the pad Add the gasket to dajust the pads highly Sander paper...
- Page 11 A corner when remove the disc edge cover, can make the sand plate close to the wall. Connection between dust bag and hose（With vacuum model） Structure Overview(FG-S1200series) Switch speed control...
- Page 12 Carbon brush replace Connection between dust bag and hose（With vacuum model）...
Need help?
Do you have a question about the FG-S225 and is the answer not in the manual?
Questions and answers