Page 3
Warning During normal testing, any blood glucose meter or lancing device may Thank you for purchasing the Kinetik Wellbeing BG-710 Blood Glucose Monitoring System. come in contact with blood. All parts of the kit are considered biohazardous Before you start testing, carefully read this Instruction Manual.
Page 4
Limitations Important Health-Related information The interference listed below have been tested and shown no apparent • Patients undergoing oxygen therapy may receive inaccurate results. influence on results at the normal or higher therapy levels. • Some people with diabetes do not experience symptoms of low blood sugar (hypoglycemia).
Getting to know your system INCLUDED IN YOUR KIT a. Meter (batteries included) b. Test Strips c. Lancing Device d. Sterile Lancet e. Control Solution f. USB data cable Manufacturer of Lancing Device and Sterile Lancet Manufacturer of Lancing Device and Sterile LancetShandong Lianfa Medical Plastic Products Co..
Page 7
When using the meter for the first time, please set the parameters of the c. Lancing Device meter. With the meter off, press and hold the side DOWN button to enter setting mode. Adi"''\"' "ocet"" Trigger Button Sliding Barrel CD Set the year OJc�] Press and release the side UP button or side DOWN button to cycle forward or...
Setting up your meter ⑦ Set low blood glucose alarm function Press and release the side UP button or side DOWN button to select the low blood glucose alarm function. If select "On",press "M" button to enter low blood glucose value setting. If select ”OFF”,press "M" button to go on to high blood glucose alarm function setting.
Computer connection You can measure your blood glucose and then save and send measurement data to a laptop or computer. 1. Install GlucoJoy software onto laptop or desktop. You can find this software on kinetikwellbeing.com 2. Insert USB into glucose meter and laptop/desktop. 3.
Page 11
Blood Sampling Preparing the lancing device CD Wash your hands and the puncture site @ Put on the lancing device cap. with an alcohol swab or soapy water. Avoid touching the trigger button. Rinse and dry thoroughly. @ Adjust the depth setting The indication marks 5 levels of skin ®...
Blood Sampling Testing CD With meter off, insert a test strip to enter into testing IMPORTANT: mode. The meter will automatically switch to testing • Use only Test Strip BS-602. mode after inserting a test strip, even if you are in •...
Page 14
Interpreting unexpected test results Interpreting unexpected test results The meter can accurately measure blood glucose concentrations between 0.5 to 33.3mmol/L (9 to 600mg/dl) I-II Expected Blood Glucose Level [ 1, 2, 3] : ® High glucose results If your test is above 33.3mmol/L(600mg/dl ), HI Time Normal Blood Glucose Range ��...
Comparing Your Meter result to a Laboratory result Comparing your meter's results with laboratory results periodically. The results of the Kinetik Wellbeing BG-710 meter are plasma equivalent. This method will help you and your healthcare professional compare your meter results with laboratory test results. The Kinetik Wellbeing BG-710 meter's test result and laboratory test results both are expressed in plasma-equivalent units.
• Your test result does not match how you feel. NOTE: • Only use the Kinetik Wellbeing control solution. • Close the control solution bottle tightly after use. • Write the date you open the control solution bottle on the bottle label.
• a problem with the meter. CAUTION: The control solution range printed on the test strip vial is for Kinetik Wellbeing Control Solution only. It is not a recommended range for your blood glucose level. CAUTION: If you continue to get control solution test results that fall outside the range printed on the test strip vial, Do Not use the meter, the test strips, or the control solution.
Replacing the battery Meter maintenance Your meter comes with two AAA alkaline batteries. Avoid getting dirt, dust, blood, control solution, water, or any other liquid The battery provides enough power for the meter to perform in the meter's test strip port. about 1000 tests.
Specifications Meter does not enter the test mode after inserting a test strip. Probable Cause What to Do Product description BG-710 Blood Glucose Monitoring System Replace the batle (and reset the date and Battery power is low. lime, if necessary.
Page 22
Specifications Warning • Any product coming in contact with blood is considered contaminated 35.4*30.9mm (L*H) LCD size (potentially infectious). • During normal testing, any blood glucose meter may come in contact Weight Approximate 50g, battery not included with blood. • Lancing devices may also be considered sharps. For disposal of sharps, refer to local regulations.
Page 26
Support Our manual should provide you with all the information you need to set up and use this product. If you have a question, have a look at our Troubleshooting page! For further assistance, why not contact our Customer Care team directly? We’re here to help! Our Customer Care team are available from 9am-5pm, Monday to Friday (excluding bank holidays).
Need help?
Do you have a question about the BG-710 and is the answer not in the manual?
Questions and answers