Subscribe to Our Youtube Channel
Related Manuals for PYD Life V3.0 PRO
Summary of Contents for PYD Life V3.0 PRO
- Page 1 TUMBLER HEAT PRESS The user manual is universal for all heater combo versions and is suitable for all colors of machines. USER MANUAL...
- Page 2 Tumbler Heat Press Tumbler Heat Press TUMBLER PRESS HEATING ATTACHMENTS AVAILABLE THIS USER MANUAL IS APPLICABLE TO THE FOLLOWING TWO VERSIONS. V3.0 PRO V3.0 PRO MAX MP270P-BD30 MP270P-BD20S MP270P-BD20 MP270P-BD17V / Conic Compatible Diameter: 7.2-8.8cm Compatible Diameter: 6-7.1cm Compatible Diameter: 7-8cm Upper Diameter: 5.5-6.4cm...
-
Page 3: How To Use The Control Panel
Tumbler Heat Press Tumbler Heat Press KNOW THE CONTROL PANEL HOW TO USE THE CONTROL PANEL? 1. How to switch between ℉ and ℃ ? Time Set Parameter Counting Down Plus Press the Set 2.Press and hold the “+”“-” As shown above, the current As shown above, the current Temperature button to enter... - Page 4 Tumbler Heat Press Tumbler Heat Press 3. How to set printing time and temperature? HOW TO CHANGE THE HEATER? Take out the heater from the left or right Turn off the machine, and unplug the Unscrew the heater; side; connect cable of heater; Press the Set Press the Plus or Minus Press the Set...
- Page 5 Tumbler Heat Press Tumbler Heat Press HOW TO PRINT A TUMBLER? Fix the image on the tumbler tightly with Adjust the pressure with the pressure Take out the tumbler and turn on the Wear protective gloves, release the Peel off the paper and check the thermal tape;...
- Page 6 Tumbler Heat Press Tumbler Heat Press Printing Parameters FAQS: Item Name Temp. Time(S) Remark Colors are lighter The temperature is too low, the pressure is uneven, or the time is too short. 1. Print on sublimation paper, mirror image; Stainless Steel Skinny 180℃ （356 ℉） 60 2. Take off the lid before printing; Tumbler 3. Use low pressure. Printed picture is vague The printing time is long, which causes the ink spread. 1. Print on sublimation paper, mirror image; Colors are less bright The pressure is too high or the temperature is too high. Ceramic/Glass Mug 180℃ （356 ℉） 280 2. Place the mug into the heater in proper position to avoid handle breaking; 3. Use medium pressure Printed picture is partially vague The heat is uneven. 1. Print on sublimation paper, mirror image; Water Bottle (Aluminum/ 180℃...
Need help?
Do you have a question about the V3.0 PRO and is the answer not in the manual?
Questions and answers
Can I use the the 30oz press to do a 20oz tumbler?
The PYD Life V3.0 PRO is compatible with multiple heater attachments, some of which support tumblers with diameters ranging from 6 cm to 8.8 cm and a maximum printable length of 24 cm. If the 20oz tumbler falls within these diameter and length specifications, it can be used with the V3.0 PRO 30oz press.
This answer is automatically generated