BLUE ELECTRIC 21386 Manual page 5

21386 100W 360° LED work light
21393 200W 360° LED work light
Safety instructions
• Only connect the work light to a 230V earthed socket.
• IP54 rated for indoor and outdoor usage.
• Carry the work light by the handle or by holding the body
of the work light. Do not carry or move the work light by
the cable.
• The work light must be placed on a non-flammable
surface.
• Do not place the work light where it may be accidentally
hit.
• Do not use the work light if it is damaged in any way.
• Service must be conducted by an authorrised electrician
only.
Maintenance instructions
• Carefully wipe the work light with a dry cloth to ensure a
good light output and proper heat dissipation.
Cat. No. Power
21386 100 watt
21393 200 watt
360o WORK LIGHT
Socket
Power supply
AC220-240V, 50Hz
Operating instructions
• Unfold the tripod legs of the work light to use the work
light in freestandig position.
• Make sure that the the tripod legs are locked in one of the
two positions.
• Before use, ensure that the work ligth and and cable are
not damaged in any way.
• Connect the work light to a suitable power supply.
• The outlet socket of the work ligth can be used for
connection of power tools or similar equipment, or for
connection of an extra work ligth (max. 2000W / 16 Amp).
• Be careful that the cord does not cause any risks in the
work place.
• Disconnect the work light from the mains supply after
use.
• Do not attempt to open the work ligth.
Handle
Switch on/off
Cable storage
Specifications
Colour Temperature: 4000K
IP rating: IP54
Power cable: 5m H07RN-F 3G1.5mm² VDE
Socket max. connection: 2000W / 16Amp