Archos TV CONNECT Manual page 12

Navigating through the ARCHOS TV CONNECT
You can use, either the pointer, or the Finger mode to navigate through interfaces and to select
items.
Pointer
- On the remote, press the "Pointer" button to activate or deactivate the pointer on screen.
- If the "Pointer functioning light" is on, the pointer is displayed on screen.
- To select an item, put the pointer on the item and press the "OK" button.
- To move an item, put the pointer on the item and hold the "OK" button until the item
enlarges, then move it.
- To swipe between home screens, move the pointer left or right while holding the "OK" button.
Finger mode
- Use the left (right) analog stick to move the virtual finger L1(R1).
- When you select an item with the left (Right) analog stick, press the "L1 (R1)" button to
validate.
- To move an item, put the L1 (R1) virtual finger on the item and hold the "L1 (R1)" button until
the item enlarges, then move it.
TIP:
Pointer mode is deactivated after 2 minutes if not used.
12