Advertisement
* After done all adjustments, Press "In-start" button and
compare Tool option and Area option value with its BOM,
if it is correct then unplug the AC cable. If it is not correct, then
correct it same with BOM and unplug AC cable.
For correct it to the model's module from factory JIG model.
* Don't push The "IN STOP KEY" before completing the
function inspection.
* When doing Adjustment, Please make circumstance as
below.
5.6 Outgoing condition Configuration
* After all function test., press IN-STOP Key by SVC Remote
controller. And make Outgoing Condition.
Copyright ©2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 15 -
LGE Internal Use Only
Advertisement
