Bosch SPI6ZDS006 Information For Use page 38

en Basic settings
Basic setting
Start programme
Tone volume
Button volume
Wi-Fi
Remote Start
1
Factory setting (may vary according to model)
38
Display text Selection
1
SP:01 SP:00 - SP:01
1
SL:02 SL:00 -SL:03
1
bL:02 bL:00 - bL:03
Cn:00 Cn:00 - Cn:01
rc:01 rc:00 - rc:02
Description
Set a default programme for when
the appliance is switched on.
¡ With the setting "SP:00", the last
programme selected is set by de-
fault when the appliance is
switched on.
¡ With the setting "SP:01", the
standard programme is set by de-
fault when the appliance is
switched on.
Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
Set the button volume during opera-
tion. Level "bL:00" switches the but-
ton tones off.
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the Home Connect app.
→ "Home Connect ", Page 39
Activate or deactivate
→ "Remote Start ", Page 40.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 40
¡ With the setting "rc:02", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
→ "Home Connect ", Page 39